Initial Setting Menu Functions
Setting the Time
This is the mode for setting the time on this product’s clock display. (Refer to page 24 for details concerning the clock display.)
1.Press the AUDIO button and select the Time setting mode in the Initial Setting Menu.
2.Select “Hour” or “Minute”
with the 2/3 buttons.
3. Set as desired with the 5/° buttons.
As soon as you switch to “Minute”, the seconds start counting from 00.
Setting the FM Tuning Step (FM)
The tuning step employed by Seek Tuning in the FM mode can be switched between 100 kHz (preset at the factory) and 50 kHz.
1.Press the AUDIO button and select the FM Tuning Step mode (FM) in the Initial Setting Menu.
2.Select the desired tuning step
with the 2/3 buttons.
Note:
•If Seek Tuning is performed in 50 kHz steps, stations may be tuned in imprecisely. Tune in the stations with Manual Tuning or use Seek Tuning again.
ENGLISH ESPAÑOL PORTUGUÊS (B) FRANÇAIS ITALIANO NEDERLANDS
22