Pioneer XC-NS1, S-F10-LRW, XC-F10, S-NS1-LRW, CT-F10 manual Connecting Up, Speaker terminal connectors

Page 7

Connecting the speakers

The speaker system consists of stereo satellite speakers and a subwoofer for powerful bass sound. Connect the speakers to the amplifier unit as shown below.

•Important: When connecting or disconnecting speakers, make sure that the power is switched off and the unit unplugged from the wall outlet.

Connecting the satellite speakers

To get the best sound from the system, it’s important that the red (+) and black (–) speaker terminals on the amplifier are connected to the corresponding terminals on each speaker. To help you match up the terminals correctly, the supplied speaker cable is color coded: connect the white half of the cable to the black (–) terminals, and the grey striped half to the red (+) terminals.

Important: Make sure that the bare speaker wires cannot touch each other, or come into contact with other metal parts once the unit is switched on.

1Insert a wire into each speaker terminal on the rear of the amplifier.

Subwoofer (Super woofer) terminal

Speaker terminals

Speaker terminal connectors

Note: Make sure that the bare speaker wires cannot touch each other, or come into contact with other metal parts unit is switched on.

 

Twist of the plastic shielding

 

then twist the exposed wire

 

strands together.

L

To open a terminal, press

 

 

down on the tab. Insert the

SPEAKERS

wire, then push the tab back

to secure it.

2 Connecting Up

2If you plan to use your speakers on a table-top or shelf, pass the free end of each speaker cable through the speaker stand.

See the diagram under step 3, below.

3Insert the speaker wires into the terminals on the rear of each speaker.

Connect the white half of the cable to the black (–) terminals, and the grey striped half to the red (+) terminals. To open a terminal, press down on the tab. Insert the wire, then release the tab to secure it.

4If you are going to use the speakers on the stands, slot the stand into place.

If you plan to wall-mount the speakers, see Wall-mounting your system on page 9.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents XC-NS1 Infringement of Copyright Contents Checking whats in the box Using this manualPutting the battery in the remote Slide out the battery holder Put in the supplied batteryBefore You Start Hints on installationAvoiding condensation problems Discs compatible with this systemStand a Slot Stand a on to the rear side of the CD-tuner Connecting the CD-tuner to the amplifierStand B Stand a Speaker terminal connectors Connecting UpPlacing the speakers Connecting the subwooferConnect the other end to the amplifier Wall-mounting your system Connecting the AM and FM antennasAM loop antenna External FM antenna Connecting external antennasFM wire antenna External AM antennaVentilation Connecting the powerConnecting to other components Power cord cautionSystem control Remote controlDisplay CD-R controlControls and Displays CD-tunerCassette tape slot Switching on and setting the clock Using menusGetting Started Playing a CDAbout the automatic door open sensor Adjusting the soundImproving poor FM reception Listening to the radioChecking the playlist order Programming the track orderDeleting the playlist Start playback Using repeat playUsing random play More CD FeaturesChanging the display Press SET to save the station Saving station presetsMore Tuner Features Tune into a radio station on either the AM or FM bandTo select a character Recall the station preset you want to nameWhen youve entered the whole name, press Menu to exit Tip Giving a station memory a nameProgram types Using RDS UK model onlyTuner starts searching for a matching station Searching for a program typePress System Disp and select PTY Search Select the program typeUse 4and ¢to select a frequency step Put the system into standbyTo stop the tape, press To play the other side of the tape, press TapeSetting the reverse mode Using the Tape DeckReducing tape hiss with Dolby NR Recording CDs Making tape recordings UKModel only Recording other sources Cancelling the record timer Setting up a futureRecording UK model only At least 1 minute Setting the record timer and the wake-up timerResetting the tape counter UK model onlyPress Timer and select WAKE-UP Timer menuSetting the wake up timer Select the component you want the timer to start playingUsing the Timer Setting the sleep timerCancelling the wake up timer Care information Additional Information Switching the open/close beep on/off Switching the door open sensor on/offSwitching the auxiliary attenuator on/off Use 4or ¢to select 12-HOUR or 24-HOUR as required Press SET Switching the time formatTroubleshooting Stereo Power Amplifier M-F10/ M-NS1 SpecificationsSatellite Speakers S-F10-LR Switching the demo on/off

XC-F10, M-F10, S-NS1-LRW, M-NS1, S-F10-LRW specifications

The Pioneer CT-F10 is a dual cassette deck that exemplifies the brand's commitment to high-quality audio reproduction. With features such as Dolby B and C noise reduction, the CT-F10 ensures crystal-clear sound while minimizing unwanted background noise. The deck provides a user-friendly interface with functions like auto reverse, allowing for uninterrupted playback. The built-in peak level meters enable precise monitoring of audio levels, making it a favored choice among audiophiles. The robust construction of the CT-F10 ensures durability, making it a reliable option for both casual listeners and serious music enthusiasts.

The Pioneer XC-NS1 is a compact music system that combines modern technology with a sleek design. This all-in-one system features an integrated CD player, FM tuner, and Bluetooth connectivity, enabling users to stream their favorite music directly from their devices. The XC-NS1 is equipped with high-quality speakers that deliver dynamic sound, making it perfect for small spaces. Additionally, the system supports various audio formats, ensuring compatibility with a wide range of media. Its user-friendly interface and remote control capabilities enhance the listening experience, making it an ideal choice for those seeking convenience and performance.

The S-F10-LRW speaker series is designed to provide exceptional sound quality and versatility. These bookshelf speakers use proprietary technology to create a natural and immersive audio experience, suitable for both music and home theater applications. The S-F10-LRW features a refined crossover design, ensuring smooth frequency transitions and an even response throughout the audio spectrum. With a stylish finish, these speakers are not only functional but also aesthetically pleasing, making them a great addition to any room.

The Pioneer M-NS1 is a powerful mini component system that packs a punch in a compact form. With advanced digital amplification technology, the M-NS1 delivers impressive wattage, producing rich and vibrant sound. Its multiple input options, including USB and auxiliary ports, allow seamless integration with various audio sources. This system also incorporates a user-friendly interface, complete with a bright display for easy navigation.

Lastly, the S-NS1-LRW speakers feature advanced acoustic engineering for an enhanced listening experience. Designed with precision, these speakers are capable of reproducing clear highs and deep lows, providing a well-rounded sound profile. Their elegant design and compatibility with a range of audio systems make the S-NS1-LRW an excellent choice for music lovers and home theater enthusiasts alike.

Together, these Pioneer models represent the brand's dedication to innovation, quality, and user satisfaction, catering to a diverse range of listening preferences and environments.
Top Page Image Contents