Pioneer S-F10-LRW, XC-NS1, XC-F10, S-NS1-LRW, CT-F10 Placing the speakers, Connecting the subwoofer

Page 8

•To remove the stand, press the center tab and slide the stand from the speaker.

Connecting the subwoofer

Use the supplied subwoofer cable to connect the subwoofer to the amplifer.

1Twist off the plastic shielding then twist the exposed wire strands together.

2Connect the bare wire ends of the cable to the subwoofer.

The white wire connects to the black terminal; the gray wire to the red.

To open a terminal, press down on the tab. Insert the wire, then release the tab to secure it.

3Connect the other end to the amplifier.

The cable will only plug in one way; line up the plug and socket before fully inserting.

Caution!

Do not connect any other amplifier to this system. In rare cases this may result in smoke or fire.

Do not block the port opening on the front of the subwoofer. Also, do not put your hand or other object into the port: you may damage the subwoofer.

If you wish to connect speakers other than the ones supplied, use only speakers with a nominal impedance of 8 Ω . Refer to the instructions that came with your speakers if you are unsure of their impedance before connecting them and switching on.

Placing the speakers

Ideally, the satellite speakers should be at about ear-level when you’re listening to them. Putting them on the floor, or mounting them very high on a wall is not recommended. For the best stereo effect, place the speakers 2–3 meters (6–9 feet) apart.

Placement of the subwoofer is not as critical as the satellite speakers because bass sounds are much less directional then middle and treble sounds. However, bear the following points in mind when choosing a suitable location.

•The subwoofer can be placed on top of the amplifier.

•As with other audio components, don’t place the subwoofer near heaters, radiators or other appliances that generate heat.

•Although you have some freedom in placement, experiment with different subwoofer locations — some will sound better than others from your usual listening position.

•Don’t use the amplifier/subwoofer on a thick rug or carpet as this can also cause ventilation problems.

Note: Avoid touching the actual speaker cone when installing or moving the subwoofer.

Left speaker

Right speaker

 

2-3 meters

 

Subwoofer

 

Amplifier

 

Listening position

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents XC-NS1 Infringement of Copyright Contents Using this manual Putting the battery in the remoteSlide out the battery holder Put in the supplied battery Checking whats in the boxHints on installation Avoiding condensation problemsDiscs compatible with this system Before You StartStand B Stand a Connecting the CD-tuner to the amplifierStand a Slot Stand a on to the rear side of the CD-tuner Connecting Up Speaker terminal connectorsConnect the other end to the amplifier Connecting the subwooferPlacing the speakers AM loop antenna Connecting the AM and FM antennasWall-mounting your system Connecting external antennas FM wire antennaExternal AM antenna External FM antennaConnecting the power Connecting to other componentsPower cord caution VentilationRemote control DisplayCD-R control System controlCassette tape slot CD-tunerControls and Displays Using menus Switching on and setting the clockPlaying a CD Getting StartedAdjusting the sound About the automatic door open sensorListening to the radio Improving poor FM receptionDeleting the playlist Programming the track orderChecking the playlist order Using repeat play Using random playMore CD Features Start playbackChanging the display Saving station presets More Tuner FeaturesTune into a radio station on either the AM or FM band Press SET to save the stationRecall the station preset you want to name When youve entered the whole name, press Menu to exit TipGiving a station memory a name To select a characterUsing RDS UK model only Program typesSearching for a program type Press System Disp and select PTY SearchSelect the program type Tuner starts searching for a matching stationPut the system into standby Use 4and ¢to select a frequency stepTo play the other side of the tape, press Tape To stop the tape, pressReducing tape hiss with Dolby NR Using the Tape DeckSetting the reverse mode Model only Making tape recordings UKRecording CDs Recording other sources Recording UK model only Setting up a futureCancelling the record timer Setting the record timer and the wake-up timer Resetting the tape counterUK model only At least 1 minuteTimer menu Setting the wake up timerSelect the component you want the timer to start playing Press Timer and select WAKE-UPCancelling the wake up timer Setting the sleep timerUsing the Timer Care information Additional Information Switching the auxiliary attenuator on/off Switching the door open sensor on/offSwitching the open/close beep on/off Switching the time format Use 4or ¢to select 12-HOUR or 24-HOUR as required Press SETTroubleshooting Satellite Speakers S-F10-LR SpecificationsStereo Power Amplifier M-F10/ M-NS1 Switching the demo on/off

XC-F10, M-F10, S-NS1-LRW, M-NS1, S-F10-LRW specifications

The Pioneer CT-F10 is a dual cassette deck that exemplifies the brand's commitment to high-quality audio reproduction. With features such as Dolby B and C noise reduction, the CT-F10 ensures crystal-clear sound while minimizing unwanted background noise. The deck provides a user-friendly interface with functions like auto reverse, allowing for uninterrupted playback. The built-in peak level meters enable precise monitoring of audio levels, making it a favored choice among audiophiles. The robust construction of the CT-F10 ensures durability, making it a reliable option for both casual listeners and serious music enthusiasts.

The Pioneer XC-NS1 is a compact music system that combines modern technology with a sleek design. This all-in-one system features an integrated CD player, FM tuner, and Bluetooth connectivity, enabling users to stream their favorite music directly from their devices. The XC-NS1 is equipped with high-quality speakers that deliver dynamic sound, making it perfect for small spaces. Additionally, the system supports various audio formats, ensuring compatibility with a wide range of media. Its user-friendly interface and remote control capabilities enhance the listening experience, making it an ideal choice for those seeking convenience and performance.

The S-F10-LRW speaker series is designed to provide exceptional sound quality and versatility. These bookshelf speakers use proprietary technology to create a natural and immersive audio experience, suitable for both music and home theater applications. The S-F10-LRW features a refined crossover design, ensuring smooth frequency transitions and an even response throughout the audio spectrum. With a stylish finish, these speakers are not only functional but also aesthetically pleasing, making them a great addition to any room.

The Pioneer M-NS1 is a powerful mini component system that packs a punch in a compact form. With advanced digital amplification technology, the M-NS1 delivers impressive wattage, producing rich and vibrant sound. Its multiple input options, including USB and auxiliary ports, allow seamless integration with various audio sources. This system also incorporates a user-friendly interface, complete with a bright display for easy navigation.

Lastly, the S-NS1-LRW speakers feature advanced acoustic engineering for an enhanced listening experience. Designed with precision, these speakers are capable of reproducing clear highs and deep lows, providing a well-rounded sound profile. Their elegant design and compatibility with a range of audio systems make the S-NS1-LRW an excellent choice for music lovers and home theater enthusiasts alike.

Together, these Pioneer models represent the brand's dedication to innovation, quality, and user satisfaction, catering to a diverse range of listening preferences and environments.
Top Page Image Contents