Furuno IB-782 manual Safety Instructions

Page 3

SAFETY INSTRUCTIONS

Safety Instructions for the Operator

WARNING

ELECTRICAL SHOCK HAZARD

Do not open the equipment.

Only qualified personnel should work inside the equipment.

Immediately turn off the power at the switchboard if water leaks into the equipment or something is dropped in the equipment.

Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service.

Do not disassemble or modify the equipment.

Fire, electrical shock or serious injury can result.

Do not place liquid-filled containers on the top of the equipment.

Fire or electrical shock can result if a liquid spills into the equipment.

Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire.

Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service.

Make sure no rain or water splash leaks into the equipment.

Fire or electrical shock can result if water leaks in the equipment.

WARNING

Keep heater away from equipment.

A heater can melt the equipment's power cord, which can cause fire or electrical shock.

Keep combustible material (such as thinner) away from the equipment.

Fire can result.

Do not operate the equipment with wet hands.

Electrical shock can result.

CAUTION

A warning label is attached to the equipment. Do not remove the label. If the label is missing or damaged, contact a FURUNO agent or dealer.

WARNING

Name: Warning Label (1)

Type: 86-003-1011-0

To avoid electrical shock, do not

remove cover. No user-serviceable

Code No.: 100-236-230

parts inside.

 

i

Image 3
Contents MULTI-COMMUNICATION Unit B . N o . O M E 5 6 0 9 Safety Instructions Safety Instructions for the Installer Table of Contents Features ForewordWord to the Owner of the IB-782 Antenna Unit System ConfigurationName Type Qty Remarks Equipment ListEquipment Overview OperationReceiving CallingIntercom Calling IB-782’s telephonesCalling communication unit’s telephones Automatic Call Forwarding Forwarding a CallReceive-Only Telephone PBX Mode Settings SettingsOID/DID Setting Changing Number for Connection to Inmarsat Services DIP Switch SettingCleaning MaintenanceMounting considerations InstallationMounting procedure MountingFollow the illustration below to wire the IB-782 WiringIB-782 Specifications of the MULTI-COMMUNICATION Unit