Select Measurement Units, Set the Date | Acu-Rite 01502BPDI manual

Note: The “ ” stays in Selectable Categories, even after setup.

Set the Time & Date

The clock and calendar are utilized to time stamp history records and other data, so it is important to set the time and date soon after you power on the display unit.

Set the Time

1. Press the up or down arrow buttons until

“SET CLOCK?” is displayed on the

Selectable Category part of the display

unit.

2.Press the “ ” button to set the clock.

3.Press the up or down arrows to adjust the hour. Note the “AM” and “PM” indicators.

4.Press the “ ” button to confirm hour selection.

5.Press the up or down arrows to adjust minutes.

6.Press the “ ” button to confirm minute selection.

The clock is now set.

Set the Date

1.Press the up or down arrow buttons until “SET DATE?” is displayed on the Selectable Category part of the display unit.

2.Press the “ ” button to set the date.

3.Press the up or down arrows to adjust the month.

4.Press the “ ” button to confirm month selection.

5.Press the up or down arrows to adjust the day.

6.Press the “ ” button to confirm day selection.

7.Press the up or down arrows to adjust the year.

8.Press the “ ” button to confirm year selection.

The date is now set.

Select Measurement Units

To select between standard units (mph, ºF, etc.) or metric units (kph, ºC, etc.):

1.Press the up or down arrow buttons until “SET UNITS?” is displayed on the Selectable Category part of the display unit.

2.Press the “ ” button to set the unit preference.

3.Press the up or down arrows to select “STAND” for standard or “METRIC” for metric units.

4.Press the “ ” button to confirm your selection.

5.Next, you will see “WIND MPH”. Press the up or down arrows to select MPH, KPH, or KNOTS for wind speed units.

6.Press the “ ” button to confirm your selection.

Units are now set.