Cobra Electronics MRHH475FLTBTEU owner manual Atis ID Programming, Bluetooth Radio On/Off

Page 15

Operating Your Radio

Bluetooth Radio On

Bluetooth Radio Off

Bluetooth® Mode Pairing and Programming

Bluetooth Radio On/Off

This setting allows you to turn On and Off the small Bluetooth radio inside this VHF radio. The default setting

is ON. Turning it Off can save some power. It can easily be switched On at any time.

To Set Bluetooth On and Off:

1.Display will show the word blue and ON or OFF flashing.

2.Press Channel UP/Down button to select ON or OFF.

3.Press the Call/Enter/Setup button to save this entry.

ATIS ID Programming

Operating Your Radio

ATIS ID Programming

The Automatic Transmission Identification System (ATIS) feature of this Cobra radio is used to identify marine vessels in some inland waterways of European countries that require ATIS transmission. An ATIS ID number is required to operate the ATIS feature. The ATIS ID number is derived from your vessels call sign. You must enter your ATIS ID number into this radio before the ATIS system will become functional.

Please consult your local dealer for questions about local ATIS requirements. The use of ATIS is prohibited outside the European inland waterways covered by the Basel Agreement.

With this feature activated the vessels ATIS ID number is transmitted after every push of the Talk button.

24 English

You have now ended Bluetooth Setup mode programming and will enter ATIS ID programming.

Channel Down

and SCAN Buttons

ATIS ID Start Screen

Channel Up/Down Button

ATIS ID Number Entry

To Set the ATIS ID Number:

NOTE

The ATIS ID is a 10 digit number that will always begin with the number “9.” You will be asked to enter only the last nine digits. The first digit, “9”, has been automatically entered for you.

1.With the radio turned Off; press and hold the Channel Down and SCAN buttons and simultaneously power On the radio.

2.The LCD will display and flash the ATIS icon.

A dash (-), to the right of the digit “9”, will be flashing for the next entry.

NOTICE

Remember, you only have one (1) attempt to set the ATIS ID number. Once this number has been entered, only your Cobra distributor can reset the ATIS ID number. You can also return the radio to Cobra for reprogramming.

3.Press the Channel Up/Down button to scroll through the specific ATIS digit being entered.

4.Pressing the Call/Enter/Setup button advances to the right, one (1) digit, for the next entry.

5.Repeat this input sequence until all nine digits have been entered. The ATIS icon will stop flashing when a successful ATIS ID entry has been made.

6.Press the Call/Enter/Setup button again, after all numbers have been entered, to save the ATIS ID number and return to the Marine Standby mode.

Nothing Comes Close to a Cobra® 25

Image 15
Contents For Warranty, Product Service Accessory Information Our Thanks to You Customer AssistanceCustomer Assistance Backlit LCD Liquid Crystal Display Screen Radio Controls IndicatorsBacklit LCD Screen Product Features Product FeaturesTable of Contents Important Safety Information Important Safety Information General PrecautionsLicensing Information Marine Communication VHR Marine Radio ProceduresBelt Clip Included in this PackageWrist Strap and Belt Clip Wrist StrapBatteries and Charger Installing the Battery PackBatteries and Charger Initial ChargeTo Remove Battery Pack from Radio Maintaining the Battery ChargeAlkaline Batteries Radio Speaker and Microphone Getting StartedCommon Radio Functions Getting StartedChannel Up/Down Buttons Backlight/Key Lock ButtonTo Display the Backlight Momentarily Key LockTo Toggle Between H-M-L Power Modes Setup Mode ProgrammingSetup Mode Programming High/Medium/Low H-M-L Power ButtonTo Set Channel Map Operating Area Squelch ControlTo Set Squelch Control International/Canada/USA Channel MapsBluetooth Mode Pairing Programming To Change Between VOX On and Off Bluetooth Mode Pairing and ProgrammingBluetooth Mode Programming Call Tone Select Ring TonesAtis ID Programming Bluetooth Radio On/OffTo Set Bluetooth On and Off Atis ID ProgrammingStandby/Receive Transmit Marine Standby and Receive Rx ModeChannel 16 Mode Tri-Watch ModeMemory Location Mode Tri-Watch mode Using Tri-Watch Tri-Watch Scan ModeTo Program Memory Locations To Erase Stored Memory Locations Channel Scan ModeTo Exit Memory Location Mode To Recall a Stored Memory LocationRewind Operation Memory Location Scan ModeMarine Standby mode Using Rewind-Say-AgainTMTo Answer and End an Incoming Call Using Rewind-Say-AgainTMto Record Audio TransmissionMobile Phone Operation Answer Incoming Phone CallsSimply dial a number on your mobile phone Using Voice DialInitiate a Phone Call To Initiate from the Mobile PhoneTo End Pairing At the End of the Day General Bluetooth Operation and Frequently Asked QuestionsLast Number Redial Floating Radio Floating FeatureMaintenance Troubleshooting Burp FeatureVHF Marine Radio Procedures Voice Calling If You Hear a Distress Call Emergency Messages Distress ProcedureMarine Emergency Signals Emergency Messages and Distress ProcedureSay Marine Distress ProcedureTell where you are Press Talk button and sayLapel Speaker/Microphone SpecificationsAccessories Long Life BatteryVHR Marine Channel Assignments VHF Marine Channel Assignments 21A 18A19A 20A66A 63A64A 65A83A 80A81A 82ADeclaration of Conformity CE Markings Declaration of ConformityCE Marking

MRHH475FLTBTEU specifications

The Cobra Electronics MRHH475FLTBTEU is a remarkable handheld VHF marine radio designed for boaters who prioritize safety and communication while on the water. With its advanced features and robust design, this radio is an essential tool for navigating the challenges of maritime environments.

One of the standout features of the MRHH475FLTBTEU is its dual and tri-watch capabilities. This allows users to monitor emergency channels while simultaneously keeping an eye on other important frequencies. The device seamlessly switches between channels, ensuring boaters never miss critical communications. The inclusion of the NOAA Weather Radio provides real-time updates on weather conditions, helping sailors stay informed about any potential storms or hazardous conditions.

The MRHH475FLTBTEU boasts an impressive 6-watt transmit power, which enhances its range and clarity. This is particularly important for emergencies, where clear communication can be the difference between safety and distress. The unit is also equipped with a built-in noise-canceling microphone that significantly reduces background noise, allowing for clearer conversations even in windy or choppy conditions.

In terms of design, the Cobra MRHH475FLTBTEU is rugged and waterproof, meeting JIS7 standards. This means it can withstand immersion in water, making it reliable for any marine environment. The backlit LCD display is easy to read in low-light conditions, displaying relevant information such as signal strength and battery life.

Another notable characteristic is the radio's rechargeable lithium-ion battery, which provides extended usage without the need for constant replacements. With a battery-saving feature, users can prolong the life of each charge, ensuring that the radio remains operational during long outings.

The Cobra MRHH475FLTBTEU is more than just a communication device; it is equipped with features like a GPS interface that provides location information for easier navigation. This integration enhances safety by allowing users to share their coordinates with other vessels in case of emergencies.

Overall, the Cobra MRHH475FLTBTEU is a powerful and versatile marine radio that combines essential safety features with reliable communication technologies. Its durability, advanced functionalities, and user-friendly design make it an invaluable asset for any boater, ensuring peace of mind out on the water. Whether for leisure or emergencies, this radio stands out as a critical piece of equipment for maritime adventures.