Cobra Electronics MRHH475FLTBTEU Channel Scan Mode, To Recall a Stored Memory Location

Page 18

Operating Your Radio

MEM Icon

Advanced Operation

To Recall a Stored Memory Location:

1.Press the MEM/ESC button. The MEM icon will be turned On.

2.Press the Channel Up/Down button to select the memory location. If a memory location has been programmed, its associated channel will display on the LCD. Your radio is now in Marine Standby mode on the selected memory location.

To Exit Memory Location Mode:

Press the MEM/ESC button to return the radio to Marine Standby mode. The last channel used in Marine Standby mode will now be displayed on the LCD and the MEM icon will disappear.

To Erase Stored Memory Locations:

1.Press and hold the MEM/ESC button for two (2) seconds. The memory location number will start flashing and the MEM icon will be turned On.

2.Use the Channel Up/Down button to advance to the memory location you want to erase.

3.Press the MEM/ESC button to select the memory location. The memory channel number will stop flashing and the channel number will start flashing.

4.Use the Channel Up/Down button to change to the channel to read “00” at the selected memory location.

5.Press the MEM/ESC button to erase that channel.

Repeat steps 2 through 5 to erase as many additional memories as you want.

6.Press and hold the MEM/ESC button for two (2) seconds. This will return the radio to Memory mode.

7.Press and release the MEM/ESC button again to return to Marine Standby mode.

Operating Your Radio

Scanning

SCAN Button

SCAN Icon

Channel Up/Down Buttons

Advanced Operation

Channel Scan Mode

During Channel Scan mode, the radio will rapidly switch from channel to channel through all the channels.

NOTE

The radio must be squelched for Channel Scan mode to function. See page 18 for Squelch procedure.

To Enter Channel Scan:

1.From Marine Standby mode, press the SCAN button. The radio will immediately begin to scan the entire channel map selected in the active channel map.

The SCAN icon will show on the LCD.

2.A signal on any channel will stop the scan for 10 seconds to allow you to listen to the traffic on that location.

3.Press the Channel Up/Down button to resume scanning the Channel Scan channels or to change the scan direction.

4.To EXIT Channel Scan mode, press the SCAN button again. The SCAN icon will disappear from the LCD and the radio will return to Marine Standby mode.

30 English

Nothing Comes Close to a Cobra® 31

Page 17 Page 19
Image 18
Page 17 Page 19
Contents For Warranty, Product Service Accessory Information Our Thanks to You Customer AssistanceCustomer Assistance Product Features Radio Controls IndicatorsBacklit LCD Screen Product Features Backlit LCD Liquid Crystal Display ScreenTable of Contents Important Safety Information General Precautions Important Safety InformationMarine Communication VHR Marine Radio Procedures Licensing InformationWrist Strap Included in this PackageWrist Strap and Belt Clip Belt ClipInitial Charge Installing the Battery PackBatteries and Charger Batteries and ChargerTo Remove Battery Pack from Radio Maintaining the Battery ChargeAlkaline Batteries Getting Started Getting StartedCommon Radio Functions Radio Speaker and MicrophoneKey Lock Backlight/Key Lock ButtonTo Display the Backlight Momentarily Channel Up/Down ButtonsHigh/Medium/Low H-M-L Power Button Setup Mode ProgrammingSetup Mode Programming To Toggle Between H-M-L Power ModesInternational/Canada/USA Channel Maps Squelch ControlTo Set Squelch Control To Set Channel Map Operating AreaBluetooth Mode Pairing Programming Call Tone Select Ring Tones Bluetooth Mode Pairing and ProgrammingBluetooth Mode Programming To Change Between VOX On and OffAtis ID Programming Bluetooth Radio On/OffTo Set Bluetooth On and Off Atis ID ProgrammingTri-Watch Mode Marine Standby and Receive Rx ModeChannel 16 Mode Standby/Receive TransmitMemory Location Mode Tri-Watch mode Using Tri-Watch Tri-Watch Scan ModeTo Program Memory Locations To Recall a Stored Memory Location Channel Scan ModeTo Exit Memory Location Mode To Erase Stored Memory LocationsUsing Rewind-Say-AgainTM Memory Location Scan ModeMarine Standby mode Rewind OperationAnswer Incoming Phone Calls Using Rewind-Say-AgainTMto Record Audio TransmissionMobile Phone Operation To Answer and End an Incoming CallTo Initiate from the Mobile Phone Using Voice DialInitiate a Phone Call Simply dial a number on your mobile phoneTo End Pairing At the End of the Day General Bluetooth Operation and Frequently Asked QuestionsLast Number Redial Burp Feature Floating FeatureMaintenance Troubleshooting Floating RadioVHF Marine Radio Procedures Voice Calling Emergency Messages and Distress Procedure Emergency Messages Distress ProcedureMarine Emergency Signals If You Hear a Distress CallPress Talk button and say Marine Distress ProcedureTell where you are SayLong Life Battery SpecificationsAccessories Lapel Speaker/MicrophoneVHR Marine Channel Assignments VHF Marine Channel Assignments 20A 18A19A 21A65A 63A64A 66A82A 80A81A 83ADeclaration of Conformity CE Markings Declaration of ConformityCE Marking

MRHH475FLTBTEU specifications

The Cobra Electronics MRHH475FLTBTEU is a remarkable handheld VHF marine radio designed for boaters who prioritize safety and communication while on the water. With its advanced features and robust design, this radio is an essential tool for navigating the challenges of maritime environments.

One of the standout features of the MRHH475FLTBTEU is its dual and tri-watch capabilities. This allows users to monitor emergency channels while simultaneously keeping an eye on other important frequencies. The device seamlessly switches between channels, ensuring boaters never miss critical communications. The inclusion of the NOAA Weather Radio provides real-time updates on weather conditions, helping sailors stay informed about any potential storms or hazardous conditions.

The MRHH475FLTBTEU boasts an impressive 6-watt transmit power, which enhances its range and clarity. This is particularly important for emergencies, where clear communication can be the difference between safety and distress. The unit is also equipped with a built-in noise-canceling microphone that significantly reduces background noise, allowing for clearer conversations even in windy or choppy conditions.

In terms of design, the Cobra MRHH475FLTBTEU is rugged and waterproof, meeting JIS7 standards. This means it can withstand immersion in water, making it reliable for any marine environment. The backlit LCD display is easy to read in low-light conditions, displaying relevant information such as signal strength and battery life.

Another notable characteristic is the radio's rechargeable lithium-ion battery, which provides extended usage without the need for constant replacements. With a battery-saving feature, users can prolong the life of each charge, ensuring that the radio remains operational during long outings.

The Cobra MRHH475FLTBTEU is more than just a communication device; it is equipped with features like a GPS interface that provides location information for easier navigation. This integration enhances safety by allowing users to share their coordinates with other vessels in case of emergencies.

Overall, the Cobra MRHH475FLTBTEU is a powerful and versatile marine radio that combines essential safety features with reliable communication technologies. Its durability, advanced functionalities, and user-friendly design make it an invaluable asset for any boater, ensuring peace of mind out on the water. Whether for leisure or emergencies, this radio stands out as a critical piece of equipment for maritime adventures.
Top Page Image Contents