Cobra Electronics MRHH350FLT owner manual Memory Location Mode

Page 17

Operating Your Radio

Advanced Operation

Advanced Operation

Operating Your Radio

TRI-WATCH Button

TW

EN

Using Tri-Watch

Tri-Watch Scan Mode:

1.

From Marine Standby mode, press the TRI-WATCH

 

button. The TW SCAN will display on the matrix

 

along with the three marine channels stored in the

 

Tri-Watch memory.

2.

The radio will scan through the three (3) Tri-Watch

 

memory channels.

MEM/ESCENTButtonSETUP

MEM

ESC

CAN

HML

Memory Location Number

Memory Location Mode

Your radio has unlimited memory locations for storing your most frequently used channels. These memory locations can be selected individually or can be scanned. (See page 32 under Memory Location Scan.)

To enter Memory mode, press MEM/ESC button. The display will show the MEM icon and the Memory Channel bank will be displayed on the matrix.

Tri-Watch Scan Mode

GMRS

R VHF

T X

A

B U I C

ATIS VOX LOMEDHISAMEMEM

3. A signal on any one (1) of the three (3) channels will

stop the scan for 10 seconds to allow you to listen to

the traffic on that location.

NOTE

After the Tri-Watchscan stops to monitor a channel, as long as you do not press any buttons within 10 seconds, your radio will automatically resume scanning the Tri-Watchchannels.

4.Press the Channel Up/Down button to resume scanning the Tri-Watchchannels or to change the scan direction.

5.To EXIT the Tri-Watchscan, press the TRI-WATCHbutton again. The TRI icon will disappear from the LCD and the radio will return to Marine Standby mode.

 

R

GMRS

 

VHF

 

T X

 

 

A

 

 

B U I C

 

ATIS VOX LOMEDHISAMEMEM

Channel Up/Down Buttons

 

FLOATING

MARINE HH350

CALL

ENTSETUP

Channel Number

GMRS

R VHF

T X

A

B U I C

ATIS VOX LOMEDHISAMEMEM

To Program Memory Locations:

1.Press and hold the MEM/ESC button for two (2) seconds. The memory location number will be displayed on the matrix and the MEM icon will be turned On.

2.Use the Channel Up/Down button to advance to the memory location (00-99) you want to program.

3.Press the MEM/ESC button to select the memory location.

4.Use the Channel Up/Down button to change to the channel you want to store into the selected memory location.

5.Press the MEM/ESC button to program that channel. The memory location will be displayed on the matrix again.

Repeat steps 2 through 5 to program as many additional memories as you want.

6.Press and hold the MEM/ESC button for two (2) seconds. This will return the radio to Memory mode.

7.Press and release the MEM/ESC button again to return to Marine Standby mode.

 

 

 

 

28 English

Nothing Comes Close to a Cobra® 29

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Our Thanks to You Customer Assistance Radio Controls IndicatorsFor Assistance in the U.S.A For Assistance Outside the U.S.ABacklit LCD Liquid Crystal Display Screen Product FeaturesBacklit LCD Screen Table of Contents General Precautions Important Safety InformationSafety Training Information Industry Canada Antenna NoticeSea Tow Automated Radio Check ARC System FCC Licensing InformationStation License Recommendations for Marine CommunicationInternational Station License Included in this PackageRadio Call Sign Included in this PackageWrist Strap and Belt Clip Install/Remove AntennaInstalling the Battery Pack Batteries and Charger To Remove Battery Pack from RadioInitial Charge Alkaline BatteriesGetting Started Maintaining the Battery ChargeCommon Radio Functions Getting StartedTalk Button Radio Speaker and MicrophoneKey Lock Channel Up Button Channel Down ButtonSetup Mode Programming Setup Mode ProgrammingHigh/Medium/Low H-M-L Power Button To Toggle Between H-M-L Power ModesTo Set Squelch Control Squelch ControlUSA/International/Canada Channel Maps To Set Channel Map Operating AreaKey Tone Mode Roger Beep ModeCall Tone Select To Set Call ToneStandby/Receive and Transmit Marine Standby and Receive Rx ModeStandby/Receive Transmit Noaa Emergency Weather Alert Weather WX Standby ModeNoaa Test Alert System Noaa Weather Channels and AlertTo Switch to Channel 16 or Channel Tri-Watch ModeTri-Watch Setup To Program or Edit the Tri-Watch Channels Advanced OperationMemory Location Mode To Exit Memory Location Mode Channel Scan ModeTo Recall a Stored Memory Location To Erase Stored Memory LocationsMemory Location Scan Mode Floating FeatureBurp Feature Floating RadioMaintain Your Watch PowerCalling Coast Stations Calling Other VesselsVoice Calling VHF Marine Radio ProceduresProhibited Communications Voice CallingEmergency Messages and Distress Procedure Emergency Messages Distress ProcedureIf You Hear a Distress Call Marine Emergency SignalsMarine Distress Procedure Limited 3-Year Warranty Warranty and Trademark AcknowledgementExclusions This limited warranty does not apply For Products Purchased In The U.S.ASpecifications Product ServiceProduct Service Specifications TypicalVHF Marine Channel Assignments VHF Marine Channel AssignmentsCanal Canal 22AChannels 84, 85, 86, 87, 87A Channels 24, 25, 26, 27Channels 13 Channels Wx 1 Thru04A 01A05A 07A19A 18A20A 21A28B 25B61A 62ACommunications in lower Mississippi River 66A79A 78A80A 81AAsignaciones de canales meteorológicos Weather Channel AssignmentsWeather Channel Assignments DC Charger Optional AccessoriesAccessories
Top Page Image Contents