Cobra Electronics MR F80B-D AdvancedProduct FeaturesOperation, Advanced Operation, Tri-Watch

Page 25

Operating Your Radio

Tri-Watch Button

Tri-Watch Mode

42 English

AdvancedProduct FeaturesOperation

Tri-Watch

Use Tri-Watchone-button access to scan the three (3) channels of most importance. Channel 16 is always included as scanned locations. The remaining locations can be set using the following procedure.

NOTE

The radio must be squelched for the Tri-Watchto function. See page 38 for the Squelch procedure.To

Set Tri-Watch Channels:

1.In Standby mode, turn the Channel knob or press the Channel Up/Down buttons on the microphone to select a 2nd or 3rd scanning channel location.

2.Press the Tri-Watchbutton to set a new Tri-Watchchannel.

The Tri-watch screen will display on the LCD and the radio will scan amongst Channel 16 and the other two Tri-Watchlocations you’ve selected. A signal on any one (1) of the three (3) channels stops the scan and transmits traffic on that channel. The channel number it is paused on displays on the LCD.

During Tri-Watch When Receiving an Incoming Transmission:

1.Press the Talk button to remain on that Tri-Watchlocation and return to Standby mode.

2.Turn the Channel knob or press the Channel Up/Down buttons on the microphone to resume scanning Tri- Watch locations.

If no button is pressed, the radio automatically resumes scanning Tri-Watchlocations when an incoming transmission is completed.

During Tri-Watch When Not Receiving an Incoming Transmission:

Press the Talk button to communicate on the last Tri-Watchlocation scanned and to return to the Standby mode.

Operating Your Radio

Memory Scan/ Clear Button

Memory Channel

Memory Channel

Advanced Operation

Memory Channels

Program or select an unlimited number of channels for the Memory Scan mode.

To Program Memory Channels:

1.From Standby mode, select a channel to record using the

Channel Up/Down buttons.

2.Press and hold the Memory Scan/Memory Clear button for three (3) seconds. The channel is recorded for scanning and MEM (memory channel) appears on the LCD when that channel is selected.

3.Press the Memory Scan/Memory Clear button to begin scanning.

The radio returns to Standby mode when the Memory Scan/Memory Clear button is pressed again.

4.Repeat steps 1 through 2 to record additional channels.

To Clear Memory Channels:

Repeat the steps above in the “To Program Memory Channels” section, this time holding the Memory Scan/Memory Clear button down for three (3) seconds to clear the memory from the selected channel. Repeat as necessary to clear additional channels.

Nothing Comes Close to a Cobra® 43

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Customer Assistance Our Thanks to youProduct Features Transceiver Controls Indicators and ConnectionsProduct Features Backlit LCD Liquid Crystal Display Screen Microphone/SpeakerBacklit LCD Liquid Crystal Display Screen Microphone/Speaker with Auxiliary ControlsTable Of Contents Important Safety Information Important Safety InformationSafety Training Information Always use only Cobra authorized accessoriesFCC Licensing Information FCC Licensing InformationRecommendations for Marine Communication VHF Marine Radio Procedures Maintain Your Watch VHF Marine Radio ProceduresVoice Calling Voice CallingMaritime Mobile Service Identity Mmsi Maritime Mobile Service Identity MmsiDigital Selective Calling DSC Digital Selective Calling DSCEmergency Messages and Distress Procedure Emergency Messages Distress ProcedureMarine Emergency Signals Radiotelephone CallsMarine Distress Procedure DSC Marine Distress ProcedureIf You Hear a Distress Call Mounting and Powering the Radio Mounting Powering the RadioIncluded in this Package Included in this PackageElectrical Power Connection Mounting and Powering the RadioMicrophone Bracket Mounting Kit Flush MountInstallation Requirements Length Wire GaugeAntenna Requirements and Attachment Safe Maximum Permissible Exposure MPE RadiusAntenna Lead Attachment External Devices ConnectionsExternal Devices and Connections Nmea Communication CableTo Install a GPS Device To Install a Public Address SpeakerPublic Address Speaker Not Included Global Positioning System GPS Device Not IncludedGetting Started Tones and AlarmsGetting Started Local Mode Button Power On-Off Volume/SquelchChannel Preset Buttons Channel Preset Function Buttons Setup Mode Programming Setup Menu Setup Mode ProgrammingStandby and Receive To Adjust the LCD Display Lamp Level LCD Display Lamp AdjustLCD Contrast To Change the ContrastSpecial Features Rewind-Say-Again Feature Special FeaturesMake Your Own Recording Voice TransmissionChannels Choose One of the Following Options to Change the ChannelVoice Transmission Transmit Power OutputPublic Address Transmit a MessageNoaa All Hazards/Weather Radio and Alert, w/SAME Weather Alert SetupNoaa All Hazards/Weather Radio and Alert, w/SAME Specific Area Message Encoding SameAdvanced Operation To Switch to Channel 16 or ChannelChannel 16/9 Advanced Operation AdvancedProduct FeaturesOperationTri-Watch Memory ChannelsScanning of Memory Channels Standby modeOperation from the Microphone To Enter Memory ScanDigital Select Calling DSC Setup Digital Select Calling DSC ProductSetup FeaturesUser Mmsi Number Transferring a Radio to a Different VesselGroup Mmsi Number DSC Auto Channel Switching Auto SWPosition Request Reply Type Individual Directory Digital Select Calling DSC ProductOperationFeaturesDigital Select Calling DSC Operation Sending Distress CallsReceiving Distress Calls When a Distress Call is ReceivedSend an Automatic Distress Call Include a Nature of Distress Message with Distress CallReceiving Distress Relay Calls Regarding Distress Relay CallsSending an All Ships Call Receiving an All Ships CallSending a Geographical Call When a Geographical Call SoundsReceiving a Geographical Call Sending an Individual CallSending a Group Call Receiving an Individual CallReceiving a Group Call Sending a Position RequestReceiving a Position Request When the Radio is in the Manual Reply ModeIf You Receive a Position If You Choose to Reply with Your PositionSending a Position Send Digital Select Calling DSC OperationProduct FeaturesCall Log and Distress Log Receiving a Position SendSpecifications Maintenance TroubleshootingMaintenance TroubleshootingEnglish Nothing Comes Close to a Cobra VHF Marine Channel Assignments 03A 01A04A 05A19A 18A20A 21A28B 25B61A 62A79A 78A80A 81AAsignaciones de canales meteorológicos Weather Channel AssignmentsWorld City Time Zones Warranty and TrademarkWorld City Time Zones Trademark AcknowledgementSend the entire product Product Service

MR F80B-D specifications

The Cobra Electronics MR F80B-D is a compact and feature-rich fixed mount VHF marine radio designed specifically for boating enthusiasts and maritime professionals. Renowned for its robust construction and innovative technology, this radio ensures reliable communication over marine channels, even in adverse weather conditions.

One of the standout features of the MR F80B-D is its built-in GPS, which provides real-time location tracking. This functionality is crucial for ensuring safety on the water, allowing users to quickly and accurately communicate their position in case of emergencies. The built-in GPS also supports DSC (Digital Selective Calling), which is an essential safety feature that enables users to send distress signals with just a push of a button, instantly alerting nearby vessels and coast guards.

The Cobra MR F80B-D is designed with user-friendliness in mind. Its large, easy-to-read display ensures that critical information is visible, even in bright sunlight. The intuitive navigation menu allows users to switch between channels and settings with ease. Its robust weatherproof construction guarantees continued operation in harsh marine environments, protecting it from saltwater, humidity, and extreme temperatures.

Additionally, the MR F80B-D incorporates a noise-canceling microphone that enhances voice clarity, ensuring that communications are crisp and clear. It features 10 NOAA weather channels, providing real-time weather updates, helping users stay informed about changing weather conditions while on the water. The built-in dual watch feature allows simultaneous monitoring of two channels, ensuring that no important communications are missed.

For those who need to stay connected to their devices, the MR F80B-D comes equipped with a USB charging port, making it straightforward to charge smartphones or other devices on board. The radio operates on both 25 watts and 1 watt, allowing users to select the appropriate power level based on their needs and proximity to other vessels or coastal facilities.

In conclusion, the Cobra Electronics MR F80B-D is a versatile and reliable marine radio that offers a combination of advanced features, including built-in GPS, DSC functionality, and a user-friendly interface. Its durability and ease of use make it an excellent choice for both recreational boaters and maritime professionals, ensuring secure and effective communication on the water.
Top Page Image Contents