![](/images/new-backgrounds/1148519/14851949x1.webp)
Connecting to Ethernet V2.0 and IEEE 802.3 Controllers
Refer to Table 4 for the settings to use for con- necting the transceiver to Ethernet Version 2.0 and IEEE 802.3 controller devices.
Table 4. DIP Switch Settings for Ethernet V2.0 and IEEE 802.3 Controllers
| Ethernet | IEEE 802.3 |
| V2.0 | |
| Controllers | |
| Controllers | |
|
| |
|
|
|
SQE Test | Enabled | Enabled |
|
|
|
Alternate | Enabled * | Enabled * |
Collision Mode |
|
|
|
|
|
Half Step Mode | Enabled | May be |
|
| Disabled |
|
|
|
* May be Disabled for IEEE compliance.
Page 17