Causes of Fault Transceiver Cables
The following list describes causes of faulty trans- ceiver cables:
■Improper Grounding (pin 1 vs. pin 4).
■Bad ground:
■Shell connector not crimped onto AUI cable braid.
■Ribbon cables in computers not shielded or improperly mounted.
■Broken pair wires or unseated AUI connec- tor pin.
■Improper pairing - Verify that signal and power wires are paired (for example, Transmit + paired with Transmit
■Individual pairs not individually shielded (for example, Ethernet V1.0 type cable).
Page 38