Kenwood TS-990SHF Dual display, Sub band display monitors the target signal itself, Main display

Page 12

HF/50MHz TRANSCEIVER TS-990S

Dual display

Fitted with dual TFT displays

Sub band display monitors the target signal itself

for an intuitive situational understanding.

The combination of two displays, main and sub band, allows you to simultaneously monitor the target signal and the surrounding area with minimal eye movement.

The 3.5” TFT sub band display is located above the main knob, which not only reduces eye movement in reading the frequency, but also allows you to moni- tor the target signal itself by displaying the demodu- lated audio spectrum. In addition, filter effects can

be displayed on the easy-to-see sub band display, allowing for intuitive operation. You can switch the sub band display between the four different view modes below according to your intention.

Simultaneous display

Normal display

 

Magnified frequency display

 

Dual display

Monitor the area surrounding the target signal with the main display

Main display

Dual frequency display Basic Screen

Single frequency display with virtual dial

Dual frequency display

Single frequency display

FSK mode

PSK mode

The main display shows basic information about the frequency, mode, meter, and others functions, as well as the on/off status of the other accessory func- tions. You can also view internal parameter settings and memory lists. In addition, it features a band

scope function that allows you to monitor band sta- tus. Execute fast sweeps with FFT processing using DSP. Switch to different view modes such as water- fall and reception/transmission equalizer views.

When you are in the mood for a change, how about these display modes?

Main display

Sub band display

Touch-sensitive main screen

Main display example views

Analogue dial display

Wide dial display (Reception specific)

Simply touch the main screen for quick QSY.

Waterfall view

Equalizer view

RTTY reception view

TS-930 type display

TS-940 type display

11

Image 12
Contents Hertfordshire WD18 9EB, United Kingdom TS-990S Page TS-990S Repeated innovation turns the tradition into a legend TS-990S NEW Main Receiver Newly developed mixer contributes to achieving +40 dBm IP3HF/50MHz Transceiver TS-990S Sub Receiver Triple DSPSub-receiver, which incorporates the TS-590S receiver Roofing filter, 500 Hz, 2.7 kHzAdvanced AGC control, fusing together digital and analogue Exacting chassis design for realizing quality soundTransmit Thermal simulation exampleSub band display monitors the target signal itself Dual displayMain display Main display example viewsNew split function allows you to use quick settings ControlNew frequency function can be operated intuitively Firmware updates by USB flash drive or USB cable Data mode supported by external I/O switchingRemote control TS-990S from your PC Kenwood SKY Command SystemDimensions Front/Rear PanelSpecifications Main Options