LCD Display Controls, USA/CAN/INT Channel Icons

Model NT3 Series

LCD DISPLAY

CONTROLS

1.VOX ICON - Indicates when eVOX mode is active.

2.TRANSMIT (TX) ICON - Indicates radio is transmitting a signal.

3.LOW BATTERY ICON - Indicates battery level is low.

4.CHANNEL NUMBER - Changes from 1~88a on VHF Marine band (1~10 on WX band).

5.USA/CAN/INT CHANNEL ICONS

6.KEY LOCK ICON - Indicates KEY LOCK mode is on.

7.WX BAND ICON - Indicates when the radio is in Weather Band mode

8.TRANSMIT POWER LEVEL (Hi / LO) ICON - Indicates TX Power setting.

9.RECEIVE (RX) ICON - Indicates radio is receiving a transmission.

10.POWER/VOLUME KNOB - Turn clock wise to turn the power on and increase the volume level. Turn counter-clockwise to decrease the volume level and turn the power off.

11.PTT Button - Press and hold to transmit voice communication. Press twice quickly to send a call alert.

12.CH 9/16 Button - Press to switch immediately to emergency channel

16.Press and hold to switch to Channel 9.

13.MENU Button - Press to access MENU mode. Press and hold to go to WX Band Receiver mode.

14.MIC - Built-in microphone.

15.ANTENNA.

16.EXTERNAL SPEAKER/MIC JACK.

17.MONITOR/SCAN Button - Press to enter SCAN mode. Press and hold to enter MONITOR mode.

18.UP/DOWN Button - Make adjustments in MENU mode.

19.SPEAKER - Built-in speaker.

Page 5

midlandusa.com