Model NT3 Series
NAUTICO3 QUICK REFERENCE CHART
MENU |
|
| NNEEEN | |||||
* / | NUN | |||||||
M | ||||||||
| * depends on CHANNEL SELECTION |
| ||||||
|
|
|
| |||||
MONITOR
Pressing and holding the MONITOR button for 1 second will let you hear noise so you can adjust the volume level of the radio when not receiving a signal. This should be used to check activity on your current channel before transmitting. Press and release the MONITOR button for 1 second to get out of MONITOR mode.
SCAN
Your NAUTICO3 can scan all channels for activity. To enter, quickly press the SCAN button. Repeat the same procedure to exit. Your radio will rapidly scan each of the channels and stop on any active channel for 5 seconds before resuming scan. When you press the PTT button to transmit on an active channel, the scanning function will stop and remain on the active channel. To resume scanning, quickly press the ▼/▲ button.
INSTANT CHANNEL 9/16
Channel 16 (Distress Channel) is used for calling other stations or for distress alerting. You must monitor Channel 16 while standing by. Channel 16 is only to be used in emergency situations. You can also switch to Channel 9, the
CALL ALERT
Your NAUTICO3 can transmit a call alert for a fixed length of time. To send a call alert, press the PTT button twice within 1/2 second. The TX icon will appear while transmitting a call alert and a tone can be heard on the speaker for confirmation.
Page 9 | midlandusa.com |