Parental Lock, User code setting, Lock a Channel

VR209

7.Press the TUNE/ENTER control to tune to the selected channel.

Parental Lock

User code setting

1.Press and hold the PTY button (13) to access user code setting mode. “CODE: _ _ _ _” appears on the screen indicating that the user should input the default user code.

2.Press the preset buttons labeled 1 - 6 to enter the 4-digit code (default value is “1111”). The input is represented as “****” for privacy. If no input is made within 3 seconds, the screen will return to SIRIUS mode.

NOTE: If the wrong code is entered, “INCORRECT” is displayed on the screen. After three incorrect entries, the unit will return to SIRIUS mode.

3.After entering the default code, “NEW: _ _ _ _” appears on the screen indicating that the user should enter a new code.

4.Press the preset buttons labeled 1 - 6 to enter a new the 4-digit code. If no input is made within 10 seconds, the screen will return to radio mode.

5.After entering a new code, “CONFIRM _ _ _ _” appears on the screen indicating that the user should re-enter the new code.

6.Press the preset buttons labeled 1 - 6 to re-enter the new the 4-digit code and confirm.

7.If the new code is correctly entered twice, “CODE SAVED” appears on the screen and the radio returns to SIRIUS mode.

Lock a Channel

1.In Sirius mode, tune to the channel you want to lock.

2.Press and hold the MODE button (4) for 3 seconds. A beep tone is heard and the message "Code:_ _ _ _" appears.

3.Enter your user code to lock the channel. “CH Locked” appears and the audio is muted for this channel. When a user returns to this channel, the user code must be entered to hear the audio.

4.If a user code is not entered within 3 seconds, the unit returns to the previous channel.

Listen to a Locked Channel

•In Sirius mode, when tuning to a locked channel, the audio output is muted and “CH Locked” appears on the display.

•The listen to a locked channel, enter the user code when “Code:_ _ _ _” appears on the screen.

•Using the TUNE/ENTER control, select “Access” to play the audio on the locked channel.

•If a user code is not entered within 3 seconds, the unit returns to the previous channel.

•If the wrong code is entered, “INCORRECT” is displayed on the screen. After three incorrect entries, the unit will return to the previous channel.

Unlock Channel

To unlock a locked channel, tune to that channel and enter the user code when “Code:_ _ _ _ “ appears on the screen. Using the TUNE/ENTER control, select “UNLOCK” to release the channel from lock for continued access. Mute for this channel will be deactivated and the channel will remain unlocked.

NOTE: The master unlock code is “3511” and cannot be changed. This code will unlock all locked channels. Please note this code and keep it in a safe place.