Icom IC-M505 instruction manual Transmitting a group call

Page 35

rRotate [CHANNEL] to select “Able to Comply” or “Unable to Comply,” push [CHANNEL•ENTER].

•When “Unable to Comply” is selected, “No Reason Given” will be transmitted.

--DSC Menu--

Select Action ˘Able to Comply

Unable to Comply

<CLR˘Exit / ENT˘OK>

--DSC Menu--

Individual ACK Ready

<CLR˘Exit / ENT˘OK>

tPush [CHANNEL•ENTER] to transmit the acknowledge- ment call to the selected station.

yAfter the individual acknowledgement call has been trans- mitted, the speciﬁed channel (speciﬁed by the calling sta- tion) is selected automatically when “Able to Com- ply” is selected, or returns to the previous condition (before entering the DSC menu) when “Unable to Comply” is selected in step r.

DSC OPERATION 6

DTransmitting a group call

The group call function allows you to transmit a DSC signal to a speciﬁc group only.

qPush [MENU] to enter the DSC menu.

wRotate [CHANNEL] to select “Group Call,” push [CHANNEL•ENTER].

• “Position Input” item appears when a GPS receiver	6
(NMEA0183 ver. 2.0 or 3.01) is not connected.

--DSC Menu--

Select Item

Position Input

Individual Call

˘Group Call

All Ships Call

Position Request

Position Report

eRotate [CHANNEL] to select the desired pre-programmed group address or “Manual Input,” push [CHAN- NEL•ENTER].

•The ID code for the group call can be set in advance. (p. 19)

•When “Manual Input” is selected, set the 8-digit ID code for the group you wish to call by rotating [CHANNEL].

--DSC Menu--

Select Address

Manual Input ˘Icom

Coast station

<CLR˘Exit / ENT˘OK>

29

Image 35

Contents IM505 Personal injury, ﬁre or electric shock Word DefinitionMay occur Equipment damage may occurCase of Emergency Iii DOCTable of Contents Precautions Restricted Radiotelephone Operator Permit is the license Operating RulesShip Station License OPERATOR’S LicenseFront panel Panel Description2TRANSMIT Power KEY H/L Function display 0TIME Zone IndicatorMicrophone 1POSITION Indicator2SCAN Indicator Call channel Basic OperationChannel selection ChannelIC-M505 International channelsAtis and DSC channels There are pre-programmed 57 international channels forReceiving and transmitting Push H/L to select the output power if necessaryCall channel programming NEL Channel commentsMicrophone Lock function Display backlightPush Channelenter Optional voice scrambler operationActivating the scrambler Programming scrambler codes Normal Scan Scan OperationScan types Priority ScanStarting a scan Setting TAG channelsClearing or setting all tagged channels DUALWATCH/TRI-WATCH Simulation DUALWATCH/TRI-WATCHDescription OperationRotate Channel to set the speciﬁc 9-digit Mmsi code DSC OperationMmsi code programming Rotate Channel to select Mmsi Check, push ChannelenterCheck the 9-digit Mmsi DSC self ID code Mmsi code checkRotate Channel to set the individual ID and ID name DSC address IDProgramming Individual ID Rotate Channel to select AddINDV ID, push ChannelenterRotate Channel to select the desired ID name for deleting Deleting Individual IDRotate Channel to select Delindv ID, push Channelenter Rotate Channel to set the group ID and ID name Programming Group IDRotate Channel to select AddGroup ID, push Channelenter Rotate Channel to select DELGroup ID, push Channelenter Deleting Group IDPosition and time programming GPS information indication Position and time indicationAfter 2 sec. Wait ACK Distress callSimple call Regular call Distress alert contains defaultPush Distress for 5 sec. to transmit the distress call Transmitting an individual call Transmitting DSC callsPush Channelenter to transmit the individual call Transmitting an individual acknowledgement Transmitting a group call Push Channelenter to transmit the group call Push Channelenter to transmit the all ships call Transmitting an all ships callTransmitting a position request call Push Channelenter to transmit the position request call Transmitting a position report call Push Channelenter to transmit the position report call Push Channelenter to transmit the polling request call Transmitting a polling request callTransmitting a position request reply call DSC Menu Position Reply Ready CLR˘Exit / ENT˘OK Transmitting a position report reply call Transmitting a polling request reply call Receiving a distress relay call Receiving DSC callsReceiving a distress call Receiving a distress acknowledgementReceiving an all ships call Receiving an individual callReceiving a group call Receiving a position report call Receiving a geographical area callReceiving a position request call Receiving a polling request reply call Receiving a polling request callReceiving a position request reply call Receiving a position report reply callRotate Channel to scroll the message Received messagesDistress message Rotate Channel to select Distress, push CHAN- NelenterRotate Channel to select Other, push CHAN- Nelenter Other messagesRotate Channel to select Offset Time, push Channelenter DSC Set modeNo offset time default Push Channelenter to set the condition Automatic acknowledgementRotate Channel to select Auto ACK, push Channelenter Rotate Channel to select Nmea Output, push Channelenter Nmea OutputIntercom operation Push IC to enter Intercom modeOther Functions Deck or tower via an external speaker or hailer speaker Able RX Speaker functionHailer operation Push Hailrx to enter hailer modeSail Automatic foghorn functionUnderway StopSelected foghorn Scan resume timer SET ModeSet mode programming Set mode itemsAutomatic foghorn frequency Dual/Tri-watchBeep tone LCD contrastScrambler code Radio powerScrambler type Connections Connections and MaintenanceMicrophone hanger Fuse replacementSupplied accessories AntennaMounting the transceiver Using the supplied mounting bracketThat the clamps press firmly against the inside MB-75 installationTighten the end bolts on the clamps rotate clockwise so UT-112/UT-98 installation Return the cables and screws to the original position HM-162E installationCompleted installation should look like this Gasket Problem Possible Cause Solution TroubleshootingTransmitter Specifications and OptionsSpeciﬁcations General ReceiverFor mounting the transceiver to a panel DimensionsOptions †Receive only Channel ListInternational channels Channel List Cut here Unit mm Template165 146 R12 Max 92.4 110 29.5 to 31.5 dPage Memo Kamiminami, Hirano-ku, Osaka 547-0003, Japan Intended Country of Use