Icom IC-M505 instruction manual Optional voice scrambler operation, Push Channelenter

Page 17

BASIC OPERATION 3

Optional voice scrambler operation

D Activating the scrambler

 

 

D Programming scrambler codes

 

 

The optional voice scrambler provides private communica-

There are 32 codes (1 to 32) or 128 codes (0 to 127)* avail-

3

tions. In order to receive or send scrambled transmissions

able for programming when an optional scrambler unit is in-

 

 

you must first activate the scrambler function. To activate the

stalled. In order to understand one another, all transceivers

 

 

function, an optional scrambler unit is necessary. See pgs.

in your group must have the same scramble code. This func-

 

 

57, 62 for setting the scrambler unit. Ask your dealer for de-

tion may not be available depending on dealer setting.

 

 

tails.

 

 

 

 

*Depends on the installed scrambler unit.

 

 

The scrambler function automatically turns OFF when

q Turn power OFF.

 

 

 

 

Channel 16 or 70 is selected.

 

 

w While pushing [16•C], turn power ON to enter set mode.

 

 

 

 

 

 

 

e After the display appears, release [16•C].

 

 

q Rotate [CHANNEL] to select an operating channel other

r Rotate [CHANNEL] to select the “Scrambler Code,”

 

 

than Channel 16 and 70.

 

 

push [CHANNEL•ENTER].

 

 

 

 

w While pushing and holding [H/L], push [IC] to turn the op-

t Rotate [CHANNEL] to select the desired scrambler code.

 

 

tional scrambler function ON.

 

 

y Push [CHANNEL•ENTER] to set and exit the scrambler

 

 

• “SCRAM” appears.

 

 

code item.

 

 

 

 

 

e To turn the scrambler function OFF, repeat step w.

 

u Push [CLR], or rotate [CHANNEL] to select “Exit,” push

 

 

• “SCRAM” disappears.

 

 

[CHANNEL•ENTER] to exit set mode.

 

 

 

 

 

 

 

 

 

 

[Example]: Programming scrambler code 5.

 

 

 

 

 

 

 

 

 

--Set Mode--

Rotate

 

--Set Mode--

Rotate

--Set Mode--

 

 

 

Push

+

˘Scan Type

 

Dual/Tri

Scrambler Code

 

 

 

Scan Timer

 

 

Beep

 

˘5 Select

 

 

 

to enter set mode.

Dual/Tri

 

 

Contrast

 

4

 

 

 

Beep

 

 

Foghorn Frequency

 

3

 

 

 

 

 

Contrast

 

 

Radio Power

 

2

 

 

 

 

 

Foghorn Frequency

 

 

Scrambler Type

 

1

 

 

 

 

 

Radio Power

to select item,

˘Scrambler Code

to select code,

<ENT˘OK>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

then push.

 

Select

then push.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11

Image 17
Contents IM505 May occur Word DefinitionEquipment damage may occur Personal injury, fire or electric shockCase of Emergency Iii DOCTable of Contents Precautions Ship Station License Operating RulesOPERATOR’S License Restricted Radiotelephone Operator Permit is the licenseFront panel Panel Description2TRANSMIT Power KEY H/L Function display 0TIME Zone IndicatorMicrophone 1POSITION Indicator2SCAN Indicator Channel selection Basic OperationChannel Call channelAtis and DSC channels International channelsThere are pre-programmed 57 international channels for IC-M505Receiving and transmitting Push H/L to select the output power if necessaryCall channel programming Microphone Lock function Channel commentsDisplay backlight NELPush Channelenter Optional voice scrambler operationActivating the scrambler Programming scrambler codes Scan types Scan OperationPriority Scan Normal ScanStarting a scan Setting TAG channelsClearing or setting all tagged channels Description DUALWATCH/TRI-WATCHOperation DUALWATCH/TRI-WATCH SimulationMmsi code programming DSC OperationRotate Channel to select Mmsi Check, push Channelenter Rotate Channel to set the specific 9-digit Mmsi codeCheck the 9-digit Mmsi DSC self ID code Mmsi code checkProgramming Individual ID DSC address IDRotate Channel to select AddINDV ID, push Channelenter Rotate Channel to set the individual ID and ID nameRotate Channel to select the desired ID name for deleting Deleting Individual IDRotate Channel to select Delindv ID, push Channelenter Rotate Channel to set the group ID and ID name Programming Group IDRotate Channel to select AddGroup ID, push Channelenter Rotate Channel to select DELGroup ID, push Channelenter Deleting Group IDPosition and time programming GPS information indication Position and time indicationAfter 2 sec. Wait ACK Distress callSimple call Regular call Distress alert contains defaultPush Distress for 5 sec. to transmit the distress call Transmitting an individual call Transmitting DSC callsPush Channelenter to transmit the individual call Transmitting an individual acknowledgement Transmitting a group call Push Channelenter to transmit the group call Push Channelenter to transmit the all ships call Transmitting an all ships callTransmitting a position request call Push Channelenter to transmit the position request call Transmitting a position report call Push Channelenter to transmit the position report call Push Channelenter to transmit the polling request call Transmitting a polling request callTransmitting a position request reply call DSC Menu Position Reply Ready CLR˘Exit / ENT˘OK Transmitting a position report reply call Transmitting a polling request reply call Receiving a distress call Receiving DSC callsReceiving a distress acknowledgement Receiving a distress relay callReceiving an all ships call Receiving an individual callReceiving a group call Receiving a position report call Receiving a geographical area callReceiving a position request call Receiving a position request reply call Receiving a polling request callReceiving a position report reply call Receiving a polling request reply callDistress message Received messagesRotate Channel to select Distress, push CHAN- Nelenter Rotate Channel to scroll the messageRotate Channel to select Other, push CHAN- Nelenter Other messagesRotate Channel to select Offset Time, push Channelenter DSC Set modeNo offset time default Push Channelenter to set the condition Automatic acknowledgementRotate Channel to select Auto ACK, push Channelenter Rotate Channel to select Nmea Output, push Channelenter Nmea OutputIntercom operation Push IC to enter Intercom modeOther Functions Deck or tower via an external speaker or hailer speaker Able RX Speaker functionHailer operation Push Hailrx to enter hailer modeUnderway Automatic foghorn functionStop SailSelected foghorn Set mode programming SET ModeSet mode items Scan resume timerBeep tone Dual/Tri-watchLCD contrast Automatic foghorn frequencyScrambler code Radio powerScrambler type Connections Connections and MaintenanceSupplied accessories Fuse replacementAntenna Microphone hangerMounting the transceiver Using the supplied mounting bracketThat the clamps press firmly against the inside MB-75 installationTighten the end bolts on the clamps rotate clockwise so UT-112/UT-98 installation Return the cables and screws to the original position HM-162E installationCompleted installation should look like this Gasket Problem Possible Cause Solution TroubleshootingSpecifications Specifications and OptionsGeneral Receiver TransmitterFor mounting the transceiver to a panel DimensionsOptions †Receive only Channel ListInternational channels Channel List 165 146 R12 Max Template92.4 110 29.5 to 31.5 d Cut here Unit mmPage Memo Kamiminami, Hirano-ku, Osaka 547-0003, Japan Intended Country of Use