Parker Hannifin N dimensions Time Delay Modules Provide, Setting Selector for Desired Function

Catalog 0600P-10/USA	“N” Series Valves
Time Delay Modules	Inline Poppet Valves - 3/8" & 3/4"

Time Delay Modules Provide:

•Delay of valve action upon application of control signal, removal of control signal or both application and removal of control signal.

•Delay intervals from 0-6, 5-12 or 10-30 seconds . . . up to several minutes with the addition of a small external reservoir.

•Repeatability within 10%, using clean filtered air.

•Change of function without disassembly . . .

with line pressure on the valve.

Function

Time delay to be used with external pressure return valve only.

Time delay modules provide precise, consistent delay of valve shift. They eliminate the need for electrical timers and relays and simplify circuitry.

Delay interval is controlled by an externally adjustable metering screw. Change of function is accomplished by loosening two lock screws, turning the slotted

M selector plate to the desired function and re-tightening the lock screws. By adding a small external reservoir, delay interval can be extended up to several minutes.

Setting Selector for

Desired Function

For valves which are solenoid pilot operated, or valves being controlled by normally open remote pilot, match the pointer marker “Elect” with the desired function indicator line.

.66

17mm

1.31

33mm

1.00 .26 Dia. 2 Holes

25mm 7mm

2.00

51mm

	Pilot Valve or
	Remote Adapter Cap
1.25	Time Delay
	Module
32mm
.58
15mm	Main Valve

To Pilot	To Main
	Valve

1.

For valves which are being controlled by normally closed pilot, match the pointer marked “Air” with the desired function indicator line.

How to Order Kits

Kits are suitable for both solenoid and remote operated valves. Kits include module, gaskets, screws, and installation instructions.

	Time Delay Module
1.	Time Delay After Application of Signal
	to Solenoid. (Elect. Pointer)
2.	Time Delay After Removal of Signal
	From Solenoid.	2.
3.	Time Delay After Application and
	Removal of Signal to Solenoid.	3.

Delay Interval	Module Kit Number
0-6 Seconds	K705 1001
5-12 Seconds	K705 1002
10-30 Seconds	K705 1003

M16Parker Hannifin Corporation

Pneumatic Division

Richland, Michigan

www.parker.com/pneumatics