5 | BATTERY |
5.1 BATTERY CHARGING
To check the charge status, install the battery and press the PTT switch while observing the BATT indicator. (see page 9)
The CWC260 battery charger supplied with the transceiver recharges a completely discharged CNB260 battery pack in about 15 hours.
Battery pack should not be charged with the supplied battery charge system for longer than 16 hours.
See figure 11 for diagram of connecting the charger to the battery.
5.2BATTERY PACK REMOVAL/INSTALLATION
1.Turn the transceiver off.
2.Turn the battery lock screw counter-
clockwise 1/4 turn.
KC | OL | ||
| PO | ||
NE | |||
| |||
Figure 5. Turning the battery lock
3.Pull the battery pack to upward and remove the battery pack.
Figure 6. Removing the battery pack
4.Attach the battery pack to transceiver.
5.Turn the battery lock screw clockwise 1/4 turn.
Figure 7. Attaching the battery pack
HX260S | Owner’s Manual | page 17 |