Pioneer PDR-609 Finalizing a disc, Load the CD-R or CD-RW you want to finalize, Press Finalize

Page 26

Getting started

Finalizing a disc

Before you can play a CD-R on an ordinary CD player, the disc must go through a process called finalization. Once finalized, a CD-R disc is no longer recordable, nor will you be able to set or clear skip IDs. Finalization is not reversible for CD-Rs so be absolutely sure that everything on the disc is the way you want it before you start.

CD-RW discs can also be finalized, although you can still erase the disc afterward and reuse it, so it's not anything like as final as it is with a CD-R disc. A finalized CD-RW disc can only be played on a CD player that is compatible with CD- RW discs (at present, these are very few).

Caution!

Finalization takes a couple of minutes. During this time never switch off the power to the unit—the disc may become unusable as a result.

1Load the CD-R or CD-RW you want to finalize.

Check that the disc is free from dust, dirt and scratches—if necessary, clean the disc, following the guidelines on page 8.

2Press FINALIZE.

The FINALIZE indicator lights.

2

After a short while you should see a display

 

something like this:

×óB->?/

SCROLL

TIME

MONITOR

ERASE

FINALIZE

 

The display shows how long finalization

 

will take—the exact time taken depends

 

on the disc.

3

 

Press 7here to cancel finalization.

REC LEVEL

REC LEVEL

3 Press 8 (6 on the front

DIGITAL

ANALOG

 

 

 

panel) to start finalization.

PUSH ENTER

Finalization takes about two minutes;

TEXT

ANALOG

 

L REC BALANCE R

 

SYNCHRO

you'll see how long there is still to go in

CD TEXT Legato Link Conversion

the display. The player stops when finished.

 

 

For a CD-R, the CD-R indicator now

 

changes to simply CD.

26

For a CD-RW, the finalize indicator lights in the display.

None of the controls on the player or the remote have any effect during finalization. If, however, the recorder hasn't managed to finalize the disc within 10 minutes, you can abort the operation by pressing 7. If you do this, the disc won't be playable on an ordinary CD player.

En

Page 25 Page 27
Image 26
Page 25 Page 27
Contents PDR-609 Important Safety Instructions Pour le modèle Canadien Avoid Direct Exposure to BeamFor Canadian model For USE United KingdomContents Hints on installation Features of the PDR-609 CD recorderUsing this manual Checking whatÕs in the boxCare and maintenance Putting the batteries in the remote controlAbout CD, CD-R and CD-RW discs Recording copyright material Before you startRecording and finalizing discs Using the digital outputs Connecting up for digital playback & recordingUsing the digital inputs About optical and coaxial jacksConnecting other Pioneer ë components Connecting upConnecting up for analog playback & recording POWER-CORD CautionFront panel LevelRemote control DISPLAY/CHARADisplay Getting Started Switching on forFirst time Showing CD text information While stopped, press DISPLAY/ Chara to switch the displaySelecting tracks directly Number buttons¥ While stopped, press Time to switch the display mode ¥ During playback, press Time to switch the display mode¥ During recording, press Time to switch the display mode Recording modes Digital signal interruptionsPower interruptions Miscellaneous informationRecording one Track from a sourcePress Synchro repeatedly to change the recording mode Press 7 to finish recordingFinalizing the disc Automatically recording and finalizing a discSource, the recorder starts Press Record REC on When youre done, pressWant to record Restart playback of the source materialMake sure one of the digital inputs is selected Setting the digitalRecording level Press MENU/DELETERecorder’s display indicates the current input Setting the analog recording levelWhen you’re happy with the recording level, stop the source Press Input Selector to choose the analog inputSetting the balance Press the jog dial Enter to confirm the balancePress Finalize Finalizing a discLoad the CD-R or CD-RW you want to finalize Replacing a track in the playlist Clearing the playlistPlaylist Playing tracks at random Repeating tracksPlaying a disc with skip IDs More playbackClearing skip IDs Setting skip IDsSkipping unwanted tracks Using CD text Load the CD-R or CD-RW you wish to edit Press Name See of Using CD textEditing CD text Edit the textGo to the track with the name you want to copy Press Name to leave the track name modeRecording Press Name Clip to copy the currently displayed into memoryTurning the dial cycles through the following levels Automatically numbering tracksManually numbering tracks Press the jog dial Enter to confirm the new levelRecording a fade Recording fade ins and fade outsStarting tracks in time increments Recording a fade outREC Mute Recording blank sectionsChecking whats at the end of a disc Checking for digital copy protection Monitoring aSource Erasing a CD-RW disc More recording featureWhen a non-finalized Disc is loadedReinitializing a disc More recordingLoaded Eject the discUnderstanding display messages Additional informationTroubleshooting Display messages relating to playbackDisplay messages relating to recording No sound is heard Power cannot beTurned on During playbackSpecifications For U.S. and Canadian models only

PDR-609 specifications

The Pioneer PDR-609 is an exceptional component CD recorder that has garnered attention for its blend of advanced technology and user-friendly features. Designed for audiophiles and casual listeners alike, this model showcases Pioneer’s commitment to delivering high-quality audio experiences.

One of the standout features of the PDR-609 is its capability to record directly from various sources, including CD players, vinyl turntables, and even external digital devices. This versatility allows users to create their own CDs, capturing their favorite tracks with impressive sound fidelity. The unit supports CD-R and CD-RW formats, enabling users to record multiple times on rewritable discs, offering flexibility and convenience.

The PDR-609 is equipped with a high-performance 24-bit DAC (Digital-to-Analog Converter), which ensures that the audio output maintains the integrity of the original sound. This feature is particularly beneficial for those who appreciate nuances in music, as it helps reproduce a clearer and more detailed audio experience. In conjunction with a robust analog circuitry, the PDR-609 allows for the playback of music that is rich in texture and depth.

Another notable technology integrated into the PDR-609 is its automatic recording level control. This functionality adjusts the recording levels in real-time, ensuring that the audio remains within optimal ranges without distortion. This is especially useful when recording live performances or from varying audio sources, giving users peace of mind that the integrity of the audio is preserved.

The front-panel layout of the PDR-609 is intuitive, featuring a clear LCD display that shows vital information, such as track time and menu options, making navigation easy. The unit also includes a remote control, enhancing usability from a distance. Additionally, its sleek design allows it to fit seamlessly into any home audio system, adding a touch of sophistication to the overall setup.

With a range of features such as pitch control, digital/analog conversion, and seamless track editing capabilities, the Pioneer PDR-609 is built for those who are not only passionate about music but also keen on creating personalized audio compilations. Its combination of high-quality components, user-friendly interface, and recording versatility makes it an ideal choice for anyone looking to elevate their listening experience.
Top Page Image Contents