Pioneer PDR-609 Power cannot be, Turned on, No sound is heard, During playback, Cannot record

Page 42

It’s often easy to mistake incorrect operation for trouble and malfunction of the unit. If you think there is something wrong with the component, check the points below first. If the problem persists, contact you nearest Pioneer-authorized service center and have them check over the unit.

Symptom

Cause

Remedy

 

 

 

Power cannot be

The power cord is unplugged from the wall outlet.

Plug the power cord into a power

turned on.

 

outlet.

 

The power was turned off from the component (stereo

Turn on the component supplying the

 

amplifier, audio timer, etc.) to which it is connected.

power to the recorder.

 

 

 

No sound is heard

The recorder is not connected up properly.

Check all connections, especially to the

during playback.

 

amplifier (p.10–11)

 

 

 

Cannot record.

The recorder is not connected up properly.

Check all connections (p.10–11)

 

The CD-R or CD-RW disc in use has already been

Use a non-finalized disc or erase the

 

finalized.

CD-RW disc (p.36)

 

The input selection is incorrect.

Select the input connected to the source

 

 

component you’ re recording from.

 

The analog REC LEVEL control is set too low.

Increase the recording level (p.23–24)

 

 

 

Recorded sound is

The analog REC LEVEL control is set too high.

Reduce the analog recording level

distorted.

 

(p.24)

 

Signal connections are incorrect.

Check all connections (p.10–11)

 

There is interference from a TV set.

Turn the TV power off or install this

 

 

unit further away from the TV.

 

The disc is damaged or warped.

Use another disc.

 

The disc is extremely dirty.

Clean the disc.

 

 

 

Remote control

The remote control batteries are exhausted.

Replace both of the remote control

operation is

 

batteries with new ones.

impossible.

There is an obstacle between the remote control unit

Remove the obstacle.

 

and main unit.

 

 

The remote control unit is being operated outside the

Operate in the remote controllable

 

remote controllable range.

range (p.9)

 

 

 

Some tracks are

The SKIP PLAY button is set to on

Set the SKIP PLAY button to off

skipped without

 

(p.28)

being played.

 

 

 

 

 

Skip playback does

The SKIP PLAY button is set to off.

Set the SKIP PLAY button to on

not occur.

 

(p.28)

 

 

 

The recorder does

The level that the recorder regards as ‘ silence’ is set

Set the silence threshold to a suitable

not recognize the end

either too low, or too high.

level for automatically numbering

of tracks during sync

 

tracks (p.33)

recording.

 

 

 

 

 

A recorded CD-R disc

The disc has not been finalized after recording. When

Finalize the disc (p.26)

cannot be played on

such a disc is loaded, the CD-R indicator lights up.

 

other CD players.

The pickup lens of the other CD player is dirty,

Try the disc on a different CD player. If

 

impairing its ability to play CD-R discs.

it plays OK then get the pickup lens on

 

 

the original player cleaned.

 

 

 

42

En

Page 41 Page 43
Image 42
Page 41 Page 43
Contents PDR-609 Important Safety Instructions Avoid Direct Exposure to Beam For Canadian modelPour le modèle Canadien For USE United KingdomContents Hints on installation Features of the PDR-609 CD recorderUsing this manual Checking whatÕs in the boxCare and maintenance Putting the batteries in the remote controlAbout CD, CD-R and CD-RW discs Before you start Recording and finalizing discsRecording copyright material Using the digital outputs Connecting up for digital playback & recordingUsing the digital inputs About optical and coaxial jacksConnecting other Pioneer ë components Connecting upConnecting up for analog playback & recording POWER-CORD CautionFront panel LevelRemote control DISPLAY/CHARADisplay Switching on for First timeGetting Started Showing CD text information While stopped, press DISPLAY/ Chara to switch the displaySelecting tracks directly Number buttons¥ During playback, press Time to switch the display mode ¥ During recording, press Time to switch the display mode¥ While stopped, press Time to switch the display mode Recording modes Digital signal interruptionsPower interruptions Miscellaneous informationRecording one Track from a sourcePress Synchro repeatedly to change the recording mode Press 7 to finish recordingAutomatically recording and finalizing a disc Source, the recorder startsFinalizing the disc Press Record REC on When youre done, pressWant to record Restart playback of the source materialMake sure one of the digital inputs is selected Setting the digitalRecording level Press MENU/DELETERecorder’s display indicates the current input Setting the analog recording levelWhen you’re happy with the recording level, stop the source Press Input Selector to choose the analog inputSetting the balance Press the jog dial Enter to confirm the balanceFinalizing a disc Load the CD-R or CD-RW you want to finalizePress Finalize Clearing the playlist PlaylistReplacing a track in the playlist Playing tracks at random Repeating tracksPlaying a disc with skip IDs More playbackSetting skip IDs Skipping unwanted tracksClearing skip IDs Using CD text Load the CD-R or CD-RW you wish to edit Press Name See of Using CD textEditing CD text Edit the textGo to the track with the name you want to copy Press Name to leave the track name modeRecording Press Name Clip to copy the currently displayed into memoryTurning the dial cycles through the following levels Automatically numbering tracksManually numbering tracks Press the jog dial Enter to confirm the new levelRecording a fade Recording fade ins and fade outsStarting tracks in time increments Recording a fade outRecording blank sections Checking whats at the end of a discREC Mute Monitoring a SourceChecking for digital copy protection Erasing a CD-RW disc More recording featureWhen a non-finalized Disc is loadedReinitializing a disc More recordingLoaded Eject the discUnderstanding display messages Additional informationTroubleshooting Display messages relating to playbackDisplay messages relating to recording No sound is heard Power cannot beTurned on During playbackSpecifications For U.S. and Canadian models only

PDR-609 specifications

The Pioneer PDR-609 is an exceptional component CD recorder that has garnered attention for its blend of advanced technology and user-friendly features. Designed for audiophiles and casual listeners alike, this model showcases Pioneer’s commitment to delivering high-quality audio experiences.

One of the standout features of the PDR-609 is its capability to record directly from various sources, including CD players, vinyl turntables, and even external digital devices. This versatility allows users to create their own CDs, capturing their favorite tracks with impressive sound fidelity. The unit supports CD-R and CD-RW formats, enabling users to record multiple times on rewritable discs, offering flexibility and convenience.

The PDR-609 is equipped with a high-performance 24-bit DAC (Digital-to-Analog Converter), which ensures that the audio output maintains the integrity of the original sound. This feature is particularly beneficial for those who appreciate nuances in music, as it helps reproduce a clearer and more detailed audio experience. In conjunction with a robust analog circuitry, the PDR-609 allows for the playback of music that is rich in texture and depth.

Another notable technology integrated into the PDR-609 is its automatic recording level control. This functionality adjusts the recording levels in real-time, ensuring that the audio remains within optimal ranges without distortion. This is especially useful when recording live performances or from varying audio sources, giving users peace of mind that the integrity of the audio is preserved.

The front-panel layout of the PDR-609 is intuitive, featuring a clear LCD display that shows vital information, such as track time and menu options, making navigation easy. The unit also includes a remote control, enhancing usability from a distance. Additionally, its sleek design allows it to fit seamlessly into any home audio system, adding a touch of sophistication to the overall setup.

With a range of features such as pitch control, digital/analog conversion, and seamless track editing capabilities, the Pioneer PDR-609 is built for those who are not only passionate about music but also keen on creating personalized audio compilations. Its combination of high-quality components, user-friendly interface, and recording versatility makes it an ideal choice for anyone looking to elevate their listening experience.
Top Page Image Contents