VARIOUS OPERATIONS
To program tracks/discs in a desired order (PROGRAM play)
ÖThe remote control is the most convenient way to perform these operations.
ÖYou can program up to 36 steps.
Ö The parenthesis ( ) show operations for the main unit.
D
POWER
|
| REPEAT MODE | PGM | CLEAR | 1 | |
2 | 3 | 1 | 2 | 3 | TIME |
|
4 | 5 | 6 |
|
| ||
|
| 7 | 8 | 9 |
|
|
| 2 | DISC | 0 | TRACK |
| 3 |
| SET | SET |
| |||
|
|
|
| – DISC + |
| |
|
| 1 | Á | 4 | ¢ |
|
|
| 7 | 8 | 3 | RANDOM | 5 |
|
|
|
|
|
| |
REMOTE CONTROL UNIT
5 | 3 |
| Press 3. |
|
|
| The program play starts from the |
|
|
| track that was programmed first. |
|
|
| DISC TRACK MIN SEC |
( | 6 | ) |
|
| PGM |
ÖItems stored in memory are saved for approximately 2 days, even if the power cord is unplugged. However, this period may be shortened somewhat, depending on the amount of memory used.
(Memory
The following operations can only be performed during normal play,
<Programming tracks during normal play>
(Direct program)
1.Press PGM (PROGRAM).
•Program mode is activated.
2.Press PGM (PROGRAM) during playback.
•The current track is programmed.
Operation example: | Programming disc 2, track 7 as step 1, | <Programming during normal playback(remotecontrolonly)> | ||||
|
| and disc 5, track 3 as step 2. | (Preprogramming) |
|
|
|
|
|
| You can program during normal playback. | |||
1 | PGM |
| ||||
Press PGM (PROGRAM) dur- | (\Operation example 1 | 2 | 3 | 4 ) | ||
|
|
| ||||
|
| ing stop mode. | • The player changes to program play when the current track | |||
|
| finishes playing back. |
|
|
| |
|
|
|
|
|
| |
| PROGRAM |
| • To change to program mode directly, press 3. | |||
( |
| ) |
2 | 2 | Use the digit buttons to se- |
|
lect the disc, then press DISC
Ç
SET.
(Use DISC
| DISC | number, then press | PROGRAM.) |
| SET | ||
| DISC TRACK | MIN SEC | |
|
| ||
DISC |
| PROGRAM | PGM |
= |
| ||
( | ) The PGM indicator starts to blink. | ||
3 | 7 | Use the digit buttons to se- | |
|
|
| |
lect the track, and press
TRACK SET.
Ç(Use 41/Á¢ to select the
TRACK | track number, then press PROGRAM.) |
SET | DISC TRACK MIN SEC |
The following operations can only be performed during stop mode
<Programming an entire disc as one step>
(Disc all program)
If you skip step 3 of the operation example, disc 2 is programmed as step 1.
<Programming a pause (remote control only)>
(Pause program)
If you press 8at step 4 , you can program a pause. When you press 8, “PA” appears in the display instead of the disc number.
ÖFor example, when making a program for recording both sides of a cassette tape, press 8 to insert a pause after programming the tracks for one side. After turning the tape over, press 8to resume recording.
Notes!!
ÖYou cannot program a pause as the first step, or program two pauses in a row.
ÖWhen you program a pause, it counts as 1 step and reduces the total number of tracks you can program.
OPERATING | BEFORE |
|
|
|
|
OPERATIONS | BASIC |
|
|
PGM
DISC TRACK MIN SEC
PROGRAM | |
( 41 Á¢ = | ) |
PGM
Ö To erase a program... |
Press 7twice during playback (or once in stop mode). You can also |
erase the program by pressing MODE, RANDOM, PREVIOUS, or |
SINGLE LOADER PLAY in either play or stop mode (or by |
pressing BEST in stop mode). |
Ö To cancel a program step |
4 5 | DISC |
SET |
\
TRACK
3SET
\
Repeat steps 2 and 3 to pro- gram additional discs and tracks.
Once the track times have been added, the PGM indicator stops blink- ing and the following display appears (Total Time).
DISC TRACK MIN SEC
PGM
In stop mode, each time you press CLEAR, the last step in the | |
program is erased. |
|
Ö If a programmed disc is missing or inserted backwards | |
during program play, “ | no dISC” appears in the display, |
the step is automatically erased, and playback proceeds to the | |
next step. |
|
Ö Program contents are stored in memory even when the power | |
is turned off (STANDBY). |
|
Notes!!
Ö If step 5 is carried out before the accumulated time is displayed, the program play starts and the time is not displayed.
Ö When UNLOAD is pressed while a program has been entered, the disc for the 1st program step comes on the center position and the hood opens.
DISC | =PROGRAM | PROGRAM | ) |
( | = 41 Á¢ = |
Ö The display is not shown if the total time of the program is 100 minutes or more.
15
<PRB1268> En