Flush Mounting
1.Cut a hole in the bulkhead for the display unit using the flush mount template.
2.Drill four holes for the mounting studs
using the flush mount template.
3.Screw the four studs into the brass inserts in the back of the display unit.
4.Sit the display unit in place and fit the washers and nuts to the studs.
Removing the display unit
The display unit can be removed after each use for protection against the environment or security reasons.
When removing the display unit, ensure that the plugs left in the boat are not exposed to the elements. Push the attached dust covers over the exposed ends of the plugs. Keep the display unit in a dry clean place such as an optional Navman carry bag.
Bracket Mounting
1. Fix the mounting bracket onto the boat using the three stainless steel screws. Do not overtighten the screws, as the bracket may not rotate.
2. Push the display unit onto the mounting bracket and tighten it firmly using the knob on the mounting bracket.
3. Attach the cables.
6-4 Systems of several instruments (4433 0nly)
Several Navman instruments can be connected | it will automatically change for the other | |
together to share data. | instruments in that group. However, the | |
The FISH 4432/4433 is particularly suited | backlight setting will not change for | |
instruments in different groups. | ||
to work with the TRACKER 5430 (4.3” | ||
| ||
greyscale)/5380 (3.8” color) - Navman’s GPS | • If an alarm sounds, mute it by clearing the | |
chartplotters with worldwide coverage. | alarm on any instrument which can display | |
There are two ways of connecting instruments | that alarm. | |
| ||
together; NavBus or NMEA. | NMEA | |
NavBus | NMEA is an industry standard for marine | |
NavBus is a Navman proprietary system that | instrument connections. Data sent by one | |
instrument over an NMEA line can be read and | ||
allows systems of multiple instruments to be | ||
displayed by another instrument that accepts | ||
built using a single set of transducers. When | ||
NMEA 0183 Version 2. It is not as flexible as | ||
instruments are connected by NavBus: | ||
NavBus as it requires dedicated connections | ||
• If the units, alarms or calibration are | ||
between instruments. | ||
changed in one instrument, then the values | ||
Please contact your Navman dealer for | ||
will automatically change in all instruments | ||
information on Navman’s full range of NMEA | ||
of the same type. | ||
enabled instruments and connection options. | ||
• Each instrument can be assigned to | ||
| ||
a group of instruments. Then, if the |
| |
backlight setting is changed in one group, |
|
FISH 4432/4433 Installation and Operation Manual | NAVMAN | 32 |