24 | ST40 Speed Instrument Owner’s Handbook |
Boat show mode
DEALER CALIBRATION
During normal operation
hold down 
and 
for approximately 12 seconds
Entry screen
Note:
If there is no key activity when the Entry screen is displayed, calibration will time out to normal operation after 5 seconds,
Calibration access 
CAL
If
Return to
Ifnormal 
operation
with factory defaults set
Factory defaults
CAL
CAL
CAUTION:
Do NOT switch the Boat Show mode on. This function must only be used for demonstration purposes.
To save your settings and return to normal operation from any screen,
hold down | and | for approximately 2 seconds |
|
|