3.If you're looking for nearest, the IntelliMap 320 says it is calcu- lating, then a list of waypoints appears. The closest is highlighted at the top of the list and the farthest at the bottom of the list.
Calculating message, left, and list of the nearest waypoints, right.
4.To see location information on the closest (highlighted) waypoint,
press ENT and the Waypoint Information screen appears. (If you wanted to, you could select another waypoint from the list with the ↑ or ↓ keys.)
A.To navigate to the waypoint, press ENT. (The Go To Waypoint command is already highlighted.) The IntelliMap 320 will show navigation information to the waypoint.
B.To find the waypoint, press ↓ to FINDENT. The Map Page ap- pears with the cursor highlighting the found waypoint.
Waypoint Information screens with the Go To Waypoint command se-
lected, left, and the Find on Map command selected, right.
To clear these menus and return to the previous page, press EXIT re- peatedly.
5.If you're looking by name, there are two options: A. You can spell out the name in the top selection box. Press ↑ or ↓ to change the first letter, then press → to move the cursor to the next letter and repeat
until the name is correct, then press ENTENT. B. Or you can jump down to the lower selection list by pressing ENT, then press ↓ or ↑ to
107