3.MENU – Press this key to show the menus and submenus, which allow you to select a command or adjust a feature. This also accesses search functions for streets, intersections, addresses and highway exits.
4.ARROW KEYS – These keys are used to navigate through the menus, make menu selections, move the map cursor and enter data.
5.ENT/ICONS (Enter & Icons) – This key allows you to save data, ac- cept values or execute menu commands. It is also used to create event marker icons.
6.EXIT – The Exit key lets you return to the previous screen, clear data or erase a menu.
7.WPT – (Waypoint) The Waypoint key is used to save and recall way- points, search for waypoints and access the waypoint list. It also launches the
8.ZOUT – (Zoom Out) – This key lets you zoom the screen out. Zoom- ing out lets you see a larger geographic area on the map. Less detail is seen as you zoom out.
9.ZIN – (Zoom In) – This key lets you zoom the screen in. Zooming in lets you see greater detail in a smaller geographic area on the map.
Power/lights on and off
To turn on the IntelliMap 320, press PWR. As the unit powers up, the Map Page is displayed first. (To switch to another page, press PAGES← or → to Page NameEXIT.)
To turn on the backlight, press PWR again. The IntelliMap 320 has three backlight levels to select from. Repeatedly pressing PWR will cycle through the backlight settings and turn off the backlight.
Turn off the unit by pressing and holding the PWR key for 3 seconds.
Main Menu
The IntelliMap 320 has a Main Menu, which contains some function commands and some setup option commands. The tutorial lessons in this section will deal only with functions, the basic commands that make the unit do something. The GPS will work fine for these lessons right out of the box with the factory default settings. But, if you want to learn about the various options, see Section 5, System Setup and GPS Setup Options.
22