1.Press MENUMENU↓ to GPS SETUPENT.
2.Press ↓ to COORDINATE SYSTEMENT.
3.Press ↓ to SETUP MAP FIXENT.
The screen below appears, and MAP SCALE is highlighted. Press ENT and enter the map's scale. This is generally at the bottom of the paper map. It's shown as a ratio, for example 1:24000. Press EXIT and the Intelli- Map 320 returns to the Configure Map Fix screen.
Configure a map fix so the unit can find your position on a printed
chart or topographical map.
Press ↓ to SELECT ORIGINENTENTENT to bring up the waypoint list. Se- lect the waypoint that you saved the reference point under and press ENT. The IntelliMap 320 displays a waypoint information screen with the command SET AS ORIGIN selected; press ENT and the unit returns to the Configure Map Fix menu. Finally, press EXIT to erase this menu. Now press ↑ to COORD SYSTEMENT, select MAP FIX from the list and press ENTEXIT. All position information now shows as a distance from the reference point you chose.
Customize Page Displays
The Position, Navigation, and Map pages all have customizable options. These options decide which information is viewable on each page.
Customize Satellite Status Page
While on the Satellite Status Page, press MENU↓ to CUSTOMIZEENT. Press ↓ or ↑ to select a display option window. With the display window highlighted and flashing, press ENT to open a list of options. Scroll ↑ and ↓ to select a different display option, then press ENT. After all op- tions are set, press EXIT to return to the page display.
Customize Navigation Page
While on the Navigation Page, press MENU↓ to CUSTOMIZEENT. Press ↓ or ↑ to select a display option window. With the display window high-
72