Materials and Basic Tools Needed
Materials Needed
To simplify the installation Sears has available the installation parts shown below. You may or may not need all of these materi- als, depending on your type of installation.
/
20" DIAMETER DRAIN PAN FOR WATER HEATERS IS" IN
DIAMETER AND UNDER
ilI WATER HEAT*:R HEAT TRAPS
HELP REDUCE HEAT LOSS DUE
TO THERMAL SYPHONING
WATER HEATER INSTALLA-
TION KIT WITH FLEXIBLE
CONNECTORS FOR 3/4" OR
I/2" THREADED OR COPPER PLUMBING
EXPANSION TANKS FOR THERMAL
EXPANSION CONDITIONS AVAILABLE
IN 2 GALLON AND $ GALLON CAPACITY
THROUGH LOCAL SEARS SERVICE
CENTERS
28" DIAMETER DRAIN PAN FOR WATER HEATERS 26" IN
DIAMETER AND UNDER
Basic Tools
You may or may not need all of these tools, depending on your type of installation. These tools can be purchased at your local
Sears store.
Pipe Wrench (2) Screwdriver
6 Foot Tape or Folding Rule Garden Hose
Drill
Pipe Dope or Teflon Tape
6 FOOT TAPE
GARDEN HOSE
PIPE
WRENCH
PHILLIPS SCREWDRIVER
(SQUEEZEPIPEDOPETUBE)
ROLL OF | TEFLON TAPE | DRILL |
(Use only on | water connections) |
|
ADDITIONAL TOOLS NEEDED
WHEN SWEAT SOLDERING
Tubing Cutters or Hacksaw
Propane Torch
Soft Solder
Solder Flux
Emery Cloth
Wire Brushes
|
|
| \ |
| HACKSAW |
|
|
| 3/4" WIRE | BRUSH |
|
| 112" WIRE | BRUSH |
|
ROLL | OFLEAD FREE |
| PROPANETORCH |
SOFTSOLDER |
|
| |
ROLL | OFEMERY | SOLDER | TUBING |
CLOTH | FLUX | CUTTER | |