Settings
Your Detector
DigiView Data Display Brightness
Your detector has a Bright display mode (for daytime driving) and three (3) levels of Dim display modes (Dim for dusk driving, Dimmer for night driving and Dark where no visual alerts will be displayed) to control the display’s brightness levels. The factory setting is Bright. The factory Dim mode default setting is Dimmer.
Dark Indicator
.
Select/Dim Button
Press and release
To Change The Brightness To Dim
Press and release the |
| Tone |
| Visual Display |
Select/Dim button once. |
|
|
| |
Two (2) beeps |
| Dim, Dimmer or Dark | ||
|
|
| ||
|
|
|
|
|
Dim Display | Dimmer Display | Dark Display | ||
Dim | Dimmer | Dark | ||
NOTE
When you change to Dim mode, the unit will enter whichever
Settings
Your Detector
Setting Dim Default
You can set the default level for Dim mode (Dim, Dimmer or Dark) either in Program mode or directly using the Select/Dim button.
Dim
Press
Dark and hold
Select/Dim
button
Dimmer
Select/Dim Button
Press and hold
To Set The Display Dim Mode Default Directly Using The Set/Dim Button
Press and hold the | Tone | Visual Display | |
Select/Dim button |
|
| |
One (1) beep each time | Cycles — see chart above | ||
| |||
| the display cycles |
| |
|
|
| |
Release the Select/Dim | None | Dim, Dimmer or Dark | |
button to select the |
|
| |
current display as |
|
| |
default. |
|
| |
|
|
|
To Set The Display Dim Mode Default Using Program Mode
(See Page 7 For Instructions On Using Program Mode)
dim default mode is set at the time.
To Change The Brightness To Bright
Press and release the | Tone | Visual Display | |
Select/Dim button again. |
|
| |
One (1) beep | Bright | ||
| |||
|
|
|
Bright Display
Bright
In Program mode, go to Display Dim, Dimmer or Dark.
Tone | Visual Display |
|
|
Two (2) beeps | Dim |
|
|
One (1) beep | Dimmer |
|
|
One (1) beep | Dark |
|
|
22 English
Nothing comes close to a Cobra® 23