Furuno 2167DS-BB, FAR-2167DS Signal cable RW-9600 Between antenna unit and processor unit

Cable fabrication for the cables connected to the 03P9342 board

Signal cable RW-9600 (Between antenna unit and processor unit)

Vinyl sheath Armor Shield

60 450

5

Vinyl tape	Expose cores, and then
	wind shield around armor.
	6
		14 5 9
	Coaxial cable	Conductor
Fasten cable clamp here.		Fold back shield.
		Coaxial cable

Power cable TPYC-1.5

Armor

60: Peel paint

L: According to location of connector.

6

L

Cables for optional equipment (use TTYCS-1 or TTYCS-4, or equivalent)

Armor	60: Peel paint.			Armor
			Shield	Sheath
				Shield
L= Depends on equipment		L		φ = 10.1 mm Conductor
connected. Measure at		5		S = 0.75 mm2
processor unit.				φ = 1.11 mm
				TTYCS-1
Vinyl tape		Expose cores, and then		Armor
		wind shield around armor.

6

Fasten cable clamp here.

φ = 16.3 mm	Sheath
	Shield

Conductor

S= 0.75 mm2 φ = 1.11 mm

TTYCS-4

2-11