Furuno 1712 installation manual Wiring, Connections, Connection of external equipment

2. WIRING

2.1 Connections

Connect the antenna cable, the power cable and the ground wire as shown in Figure 13.

ANTENNA UNIT*1

Signal cable (select one)

MJ-A10SPF0009-050 (5m)		DISPLAY UNIT
MJ-A10SPF0009-100	(10m)
MJ-A10SPF0009-150	(15m)
MJ-A10SPF0009-200	(20m)
MJ-A10SPF0009-300	(30m)*2

Connection of external equipment

Navigator/echosounder

This radar can receive the following NMEA 0183 format data sentences from a navigator or echosounder:

GLL:	Geographic position - Lat/Long
BWR:	Bearing and Distance to Waypoint -
	Rhumb line
BWC:	Bearing and Distance to Waypoint
GLC:	Geographic Position - Loran-C
GTD:	Geographic Position - Time Difference

MJ-A3SPF0019-035 (3.5m)

Power cable

FUSE (5A)

WHT (+)

+

-

BLK (-)

GROUND Connect ground wire to bolt fastened (or welded) to hull.

RMA:	Recommended Minimum Specific
	Loran-C Data
RMB:	Recommended Minimum Navigation
	Information
RMC:	Recommended Minimum Specific
	GPS/Transit Data
VTG:	Track Made Good and Ground Speed
MTW:	Water Temperature
DBT:	Depth Below Transducer
DBS:	Depth Below Surface
DPT:	Depth Below Transducer with offset
	value

POWER SUPPLY
12/24 VDC	*1	: Antenna of MODEL 1622,

1621 or 1621M2 is available.

*2 : Optional for 24 VDC ship's mains only.

Figure 13 Connections

GGA: GPS - Rx status, L/L

7