Making Binding Post/Speaker Wire Connections

CONNECTING THE SUBWOOFER TO

THE SYSTEM—HOOKUP OPTIONS

IMPORTANT NOTE: USE ONLY ONE OF THESE OPTIONS.

NEVER COMBINE HOOKUP OPTIONS.

OPTION #1 Receivers that include a “SUB OUT” feature—

the most common hookup method with Dolby Digital® and DTS® receivers.

(Artwork not

to scale)

•Connect a single RCA cable from the “SUB OUT” of your receiver to the LFE input of the subwoofer. This connection method bypasses the subwoofer’s internal filter and relies on the filter built into your receiver. Make no other signal connections. Do not use speaker wire to make the connection to the subwoofer.

•Connect all other speakers directly to the receiver. Adjust your receiver’s speaker configurations as follows:

Front speakers = SMALL Center and Surrounds = SMALL Subwoofer = ON, YES, or PRESENT

•Depending on your front speakers’ bass output capabilities, set the crossover frequency on the receiver to 80Hz for tower and bookshelf speakers (speakers with a woofer 5 1/4" in diameter or larger) and 100-120Hz for satellite speakers. Consult your receiver’s owner’s manual for instructions.

OPTION #2 Two channel or Dolby Pro Logic® receiver with no “SUB OUT.”

Use two-conductor 16 gauge or thicker speaker wires. See your Polk Audio dealer for wire recommendations.

Note: Do not use the line or LFE input in this configuration.

•Connect the left and right front speaker outputs of your receiver to the speaker level inputs of the subwoofer using speaker wire (see “Making Binding Post/Speaker Wire Connections” for detailed instructions).

•Connect the left and right front speakers using speaker wire from the speaker level outputs from the subwoofer.

•Connect the center channel speaker directly to the center channel output from your receiver.

•Connect the rear surround satellites directly to the rear or surround channel outputs from your receiver.

•Adjust your receiver’s speaker configurations as follows:

Front speakers = LARGE

Subwoofer = OFF or NO

Center and Surrounds = SMALL

(Artwork not

to scale)

Making Binding Post/Speaker Wire Connections

Note that one of the speaker input terminals on the rear of the subwoofer is marked red (+) and the other black (-). Make certain that you connect the wire from the red (+) terminal of your receiver to the red (+) terminal on your subwoofer and the wire from the black (-) terminal of the receiver to the black (-) terminal on your subwoofer. Speaker wire has some indication (such as color coding, ribbing, or writing) on one of the two conductors to help maintain consistency.

Note: If your subwoofer doesn’t seem to produce much bass, it is most likely that one of the speaker wires is connected backwards. Double check all connections for correct polarity.

Strip 1/2" (12mm) of insulation from each of the two conductors on both ends to expose the bare wire. Twist the exposed wire of each conductor to form two un-frayed strands (one on each end).

Unscrew the binding post hex nuts several turns. Insert the exposed wire, ensuring that none of the bare wire ends touch each other, because contact could result in an electrical short and cause your receiver to turn off or malfunction.

With the speaker wire inserted into the binding post, turn the hex nut clockwise until it's snug.

8Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)

DSWPRO600, DSWPRO400, DSWPRO500 specifications

Polk Audio has long been a name synonymous with high-quality audio equipment, and their DSWPRO series of subwoofers—specifically the DSWPRO400, DSWPRO500, and DSWPRO600—are no exception. Designed to offer deep, powerful bass while seamlessly integrating into any home theater setup, these subwoofers boast a range of features and technologies that enhance the listening experience.

One of the hallmark features of the DSWPRO series is Polk's proprietary Dynamic Balance technology. This innovation ensures cleaner, more accurate sound reproduction by minimizing distortion. It allows for a broader frequency response, producing rich bass that is both powerful and precise. Each model in the series also features a high-efficiency Class D amplifier, delivering impressive power output while remaining energy-efficient.

The DSWPRO400, the entry-level model, comes with an 8-inch driver and can deliver up to 150 watts of power. Its compact design makes it an excellent choice for smaller rooms or spaces where placement is a concern. The DSWPRO500 steps up with a 10-inch driver, providing deeper bass and enhanced sound quality, while its 200-watt output power makes it suitable for larger rooms. The flagship model, the DSWPRO600, features a robust 12-inch driver that can handle up to 300 watts of power, making it ideal for audiophiles looking for a more impactful low-end experience.

All models in the DSWPRO series come equipped with advanced features like a built-in low-pass crossover and a phase control switch, allowing users to customize the subwoofer's performance to best fit their specific audio ecosystem. The front-firing port design helps maximize room acoustics, ensuring that sound waves emanate uniformly throughout the space.

Polk Audio has also emphasized user-friendliness in the DSWPRO series. With easy-to-access controls located on the rear panel, adjusting settings like volume and crossover frequency is a breeze. Additionally, the subwoofers support a range of connectivity options, including RCA and speaker-level inputs, making it easy to integrate them into various home audio setups.

With their combination of advanced technology, sleek design, and robust performance, the Polk Audio DSWPRO400, DSWPRO500, and DSWPRO600 subwoofers are excellent choices for anyone looking to enhance their audio experience, whether it's for music, movies, or gaming. These models offer the versatility and power needed to bring your favorite content to life, making them a worthy investment for any sound enthusiast.