Schumacher owner manual Specifications, Model XI41DU

PROBLEM	REASON	SOLUTION
Inverter does not	Poor contact at	Check for poor
turn on.	terminals	connection to battery
		or power supply.
		Make sure connection
		points are clean. Rock
		clamps back and forth
		for a better connection.
	Fuse is blown.	A blown fuse is
		usually caused by
		reverse polarity or
		a short circuit within
		the inverter.
		To replace, contact
		a qualified service
		technician who will
		diagnose the inverter
		and replace the fuse(s)
		with the appropriate
		replacement(s).
	Inverter may be	See warranty and call
	defective.	Customer Service
		1-800-621-5485
		(Hours 7:00 am to
		5:00 pm CST).

9. SPECIFICATIONS
Model: XI41DU		410 Watts
Maximum Continuous Output.	.........................................
Surge Capacity (0.1 second)		820 Watts
Optimum Efficiency		85%
No Load Current Draw		<0.5A
Output Frequency	60Hz ± 3Hz
Output Wave Form	Modified Sine Wave
Input Voltage Range	10.5V – 15.5V		DC
Low Battery Alarm	Audible, 11V	± 0.3V	DC
Low Voltage Shutdown	Under 10.5V	± 0.3V	DC
High Voltage Shutdown	Over 15.5V	± 0.5V	DC

• 10 •