Do not install a fuse with a higher amp rating than the original fuse, as this may damage the inverter and any product you use with the inverter. Make sure to correct the cause of the blown fuse before using the inverter again.
9.TROUBLESHOOTING
PROBLEM | REASON | SOLUTION |
Red LED is on, | Poor contact at | Unplug and reinsert |
audible alarm | terminals. | the 12V plug or check |
is on, and/or |
| connections at power |
inverter does not |
| supply. |
function. | Fuse blown. | See “IF THE INVERTER |
| ||
|
| FUSE BLOWS” section. |
| Inverter shutdown. | See “LED INDICATOR |
|
| AND SHUTDOWN |
|
| PROTECTION” section. |
| Inverter may not be | See Warranty and call |
| working properly. | Customer Service. |
The red LED is | 12V Accessory | Check for poor connection |
lit and the green | plug or clips are | to battery and frame. |
LED is not. | not making a good | Make sure connection |
| connection to the | points are clean. Rock |
| battery. | clips back and forth for a |
|
| better connection. |
| Connections are | Unplug the charger and |
| reversed. | reverse the clips. |
| Inverter may not be | See Warranty and call |
| working properly. | Customer Service. |
|
|
|
• 9 •