Pioneer DEH-P3800MP operation manual DIN Rear-mount

DIN Rear-mount

Installation using the screw holes on the side of the unit

1. Remove the frame. (Fig. 8)

Frame	To remove the frame, extend top and bot-
	tom of the frame outwards in order to
	unlock it. (When reattaching the frame,
	point the side with a groove downwards
	and attach it.)
	• It becomes easy to remove the frame if
	the front panel is released.

Fig. 8

2.Fastening the unit to the factory radio mounting bracket. (Fig. 9) (Fig. 10)

Select a position where the screw holes of the bracket and the screw holes of the head unit become aligned (are fitted), and tighten the screws at 2 places on each side. Use either truss screws (5 ⋅ 8 mm) or flush surface screws

(5 ⋅ 9 mm), depending on the shape of the screw holes in the bracket.

10

Fig. 9

Screw

Dashboard or Console

Factory radio mounting bracket

12

Fig. 10