Bushnell 960040 instruction manual Battery Disposal

Page 13

3. Ensure all batteries in the main unit & USB transmitter are fresh. Replace the batteries when the low battery indicator appears on the main unit (refer to the “LOW BATTERY INDICATION” section)

4. If the system tray icon of the 4-Day Forecast program disappears on the lower right of your Window, your program is terminated and is no longer accessing the 4-day forecast from the Internet. Restart the program again.

5. In the first few minutes of the RF reception from USB transmitter, the main unit will show data on one part of the screen and this is normal. The rest of the screen display data will gradually appear in the next 10 minutes or more. If you have waited 1 hour or more without seeing the rest of the screen, shorten the distance between the USB transmitter & main unit and check the battery levels. Then repeat the setup procedure in “ESTABLISH RF CONNECTION WITH MAIN UNIT” section. If it continues to fail, try removing the USB connection and all batteries from the USB transmitter. Reinstall the batteries and then reconnect the USB connection again. Repeat the setup procedure in “ESTABLISH RF CONNECTION WITH THE MAIN UNIT” section.

6. If the RF indicator is showing full strength ( ) but one or more of the next 3 days’ forecast is missing on the main unit & PC program, your PC may have been offline for several days. Connect your PC to the Internet again to receive the latest forecast update.

7. If all forecast information appears except the UV Index, your PC may have been offline for more than 1 day. Connect your PC to the Internet again to receive the latest UVI forecast update.

8. If the forecast reading displayed in the 4-Day Forecast software does not match with the main unit, press the TRANSMIT button on the USB transmitter to re-transmit the signal again and wait for 10 minutes or more.

9. If your time on the 4-Day Forecast software window & main unit display does not accurately match your local time, click [SETTING…] on the 4-Day Forecast program menu and set the hour offset until the proper time is set.

10. If your city does not appear in the 20,000 city list, select the one nearest to your home location.

11. Heavy Internet traffic may slow down the response time of the server temporary. Try again later if you wish to update the forecast manually by the [UPDATE FORECAST] button.

BATTERY DISPOSAL

Replace only with the same or equivalent type recommended in this manual. Please dispose of old, defective batteries in an environmentally friendly manner in accordance with the relevant legislation.

SPECIFICATIONS

Software: Compatible with Windows 2000, XP & Vista (Microsoft .NET Framework 2.0 required)

USB: 1.1 or above

Transmission: Up to 100M (330 ft.) in open area

Clock: Auto-synchronized clock from Internet, Quartz back-up

Power: AA x 6 pcs for main unit , AAA x 3 pcs for USB transmitter, Alkaline or Lithium batteries.

13

Image 13
Contents Instruction Manual Overview Names and Functions of Buttons/Keys Setting UP the Main Unit Receiver Initial Setup & Software InstallationEstablish RF Connection with Main Unit Weather Forecast DAY Forecast InformationAverage Humiidty Forecast Main UNIT’S Display HI / LO Temperature ForecastChance of Precipitation Maximum UV Index ForecastTime Last Update of ForecastAverage Wind Speed & Wind Direction Forecast RF Reception StatusMoon Phase Alarm TimeSunrise / Sunset Time DatePC Program USB TransmitterUpdate Forecast SettingHome Weather Send to ReceiverSelect Location City 1, 2, 3Battery Disposal Page TWO-YEAR Limited Warranty Bushnell Outdoor Products