Stearns B524 manual Over Inflation

Page 13

5.4 OVER INFLATION

CAUTION

Do not over-inflate the kayak. Over-inflation is the primary cause of leaks. Inflate the kayak until most of the wrinkles in the fabric are gone and it feels firm to the touch, but do not exceed 1.75 psi (0.12 bar) in the main air chambers and 1.0 psi (0.07 bar) in the floor chamber.

Water temperature and weather affect the air pressure in the boat. In cold weather your kayak will lose some pressure because the air will contract. If this occurs, you may want to add more air to improve your boat’s performance. In hot weather, the air will expand. You must let out some air to prevent the boat from failing from over pressure. Avoid exposing your kayak to extreme temperatures (hot or cold).

Check for proper inflation often. Use your thumb to press on the port (left) and starboard air chambers (right). You should be able to press down 3/4 in. (19 mm). The chamber should feel firm without too much resistance.

If you have difficulty achieving 3/4 in. (19 mm), the chamber could be over inflated.

If you are easily able to press further than 3/4 in. (19 mm), the chamber could be under inflated.

Before paddling, be sure all the kayak's air chambers are properly inflated.

! DANGER !

DO NOT overload your kayak which exceeds the rating on the capacity plate. Overloading a kayak can result in loss of control and an unsafe kayak. If your kayak has no capacity plate, contact the selling dealer or the manufacturer.

CAUTION

On warm sunny days, keep the kayak either in water or in shade (if kept inflated on land). This will avoid expanding chambers due to rise in temperature which can result in seam tears, delamination, popped I-Beams and pinholes. Also keep in mind to avoid asphalt, sand, pebbles or concrete in direct sunlight as they radiate high ground heat.

11

Image 13
Contents St. Cloud, Minnesota 56302 U.S.A Phone 320 252-1642 or Cordova B524First Assignment MANUFACTURER’S Statement of Origin For a VesselTable of Contents Declaration of Conformity Introduction WarrantyModifications Boating Safety Boating Regulations Boat Safety LabelsRegistration EducationResponsibilities of the Operators Restricted AreasThis Kayak is not a Personal Flotation Device AlcoholCapacity SpecificationsCordova B524 Cordova capacity labelInflation Setup FeaturesPreparing Your Stearns Inflatable Kayak CordovaQuick Start to Inflating Your Kayak Type Knowing Your ValvesMake Sure Bladders are Aligned TypeOver Inflation Before You Start UnderwayTransporting, Carrying and Towing Folding Care and MaintenanceRepairing Pinholes Repairing Small Punctures and CutsRepairs Problem Solution TroubleshootingRepairing Pinholes Read Care and Maintenance sectionStearns Stearns Drive Sauk Rapids, MN Limited WarrantyUSA Thank you for responding to the following Please Type or Print ClearlyIf yes Business Reply Mail