Hobie Tiger manual Classical Spinnaker kit

Page 21

21

Classical Spinnaker kit

1

Attach the Spi halyard block

Shackle the spi halyard block through the small bow shackle attached to the thin cord at the top of your FX- One mast. Now pass the halyard through the pulley and thread as per the photograph.

2

Fit the two ratchet blocks and stand-up springs to the eye straps on the inboard side of the daggerboards.

3

Attach the spinnaker pole to the tang at the middle of the front crossbar.

4

Attach the spinnaker pole bridles and the mid pole support wires to the small hole in the front of the bow tang.

Jib furler bridle

Mid pole support wire

Spi pole bridle

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Assembly Manual Mast Stay Away Electrical Wires List of parts Hull assembly Trampoline Tant that the trampoline lacing is kept very tight Rudder assembly Tiller crossbar & extension Mast Set-up Spreader Bars Mast Set-up NB For the 1st time you raise Mast, it is recommended Crew Skipper TrapezeBoom Mainsail Cunningham Jib Jib sheet self tacking system Mainsheet system Before Sailing Classical Spinnaker kit Classical Spinnaker kit Schematic of Tiger classical spi set-up
Top Page Image Contents