Hobie 18 SX, 18 SE manual Hobie

Page 34

CAUTION / SAFETY TIPS

Watch for overhead power lines. Never rig, trailer or sail the boat near overhead power lines. Contact with a power line could be fatal.

Install Drain Plugs. Even the most experienced of boaters forget to install the drain plugs sometimes. When installing the plugs, be sure that the threads and gaskets are free of sand/ grit. Any debris on the plug could cause a water leakage.

Sail to your experience. Do not try to do more than you can. Do not take the Hobie 18 out in the surf and do not head out for the ocean unless you are a real professional.

Wear a life jacket. Wearing life vests while sailing is something that is very important and should be done at all times. Also, a sailboat could sail away by itself if a person were to fall overboard. The best advice to a sailor is to stay with the boat. If they happen to fall overboard, or when righting the boat, they should hold onto the boat and not let it get away.

Learn the right-of-way rules and when in doubt, give way to others.

When trailering the Hobie 18 be sure to tie the boat and all the loose parts to the trailer in a secure manner. Stop and check the tie downs often.

Hobie Cat does not recommend leaving the Hobie 18 in the water on a mooring. Accelerated wear to the boat and rigging will be experienced. Damage to the hull material is possible. Limitation of the mast rotation and tensioning of the rigging are required to lessen this wear. Inspect rigging often and tape rigging rings and shackles to prevent loosening.

Part # 63450001

Hobie 18’ in Flight

HOBIE CAT

4925 Oceanside Blvd.

Oceanside, CA. 92056

Phone (760) 758-9100 Fax (760) 758-1841

WWW.HOBIECAT.COM

For your nearest HOBIE dealer

or

for help and information call:

1 (800) HOBIE - 49

32

Image 34
Contents Page Welcome to Hobie WAY of Life Raising the Main Sail 14-15 Setting up your Hobie12-13 Illustrations 18-25Packaging Layout Framing the Hulls Trampoline Assembly Page Page Mast Assembly Page Stepping the Mast Page Boom Installation JIB Block InstallationHobie 18 and SX18 Updates Installing the Rudder AssemblyRudder and Tiller Cross BAR Installation Pre 1987 boats Raising the Sails H18SX Downhaul Instructions Raising the Jib Dagger Boards Hobie CAT 18’ Index Mast Assembly Illustration NoIllustration No Jib Halyard Assembly Tiller Connector KitRudder Assembly Illustration No Outhaul Car AssemblyIllustration No Traveler Assembly Roller Furler AssemblyIllustration No Old style Dolphin Post Assembly Illustration No New style Dolphin Post AssemblyParts Relating to Diagram on Illustration No New style Tiller ConnectorSailing Your Hobie 18’ Turning Docking Trailering Loading Your Trailer Frame and Rollers About your Hobie 18’ Hobie