Hobie 12 manual

Page 7

(Figure 9). Place the sail in the cockpit and connect the zipper by wrapping the luff sleeve around the mast. Fold the webbing around to

th~.velcro@~tt~chmeD.tp()int(Figure 10).

t.

.

Fig.9

Fig. 10

Make sure the halyard is on the inside of the luff sleeve.Now hoist the sail by pulling down on the halyard and closing the zipper simul- taneously. When the sail is fully raised, close the Velcro@ cover webbing and cleat off as shown (Figure 11).

.

!"

, Oc

~

~

t,

J:~'"

,

Fig. 11

-6-

Image 7
Contents HOLDER@12 Introduction HOLDER12@Terminology 8b Main SheetBlock 20DownhaulLine3/16x UpperMastComptip@ 16Mainsheet5/16x GudgeonsPadeyeasshownin Plugs II. Traveler AssemblyLine,from the outsideof the HOLDER@ WInsert the top sectionof the mast into Page ~ .Youare now readyto connectthe IV. Boom AssemblyOuthaul, Downhaul and Vang Assembly GooseneckFigure12.Then take the clewPage VII. Rudder and DaggerboardSpecial Balancmg the Boat Mainsheet,thengrabontoeither the gunnelor Basic SailingIX. Trailering ChangingDirection Sendin your warranty cardKnots to Use Basic Sailing~!DER