Pioneer CT-W803RS, CT-W603RS Relay Recording Sequence with Reverse Mode Switch Setting, Deck

Page 16

iRECORDING

RELAY RECORDING (CT-W803RS/ CT-W703RS) (from DECK I to DECK II)

2 3 4

5 7 1

1.Load tapes for recording in DECK I and DECK II.

2.If you use AUTO BLE tuning, see page 15.

3.Set the DOLBY NR ON/OFF switch and set the DOLBY NR switch.

4.Set the REV MODE switch to _-_.

5.Press the recording (e) button of DECK I.

6.Prepare the audio source from which you wish to re- cord. Turn on the stereo amplifier and prepare it for playback of the desired audio source.

7.Adjust the recording level. For details, see page 14

"ADJUSTING THE RECORDING LEVEL".

8.Press the playback (• or <) button of DECK I to begin recording.

•When recording on both sides, press the b" button. If the • button is pressed, recording will stop after only one side is recorded.

•When the tape in deck one ends, the other deck automati- cally begins recording.

NOTES:

• When erasure prevention tabs are broken, you cannot record

even if you press the recording (o) button.

•You cannot relay-record from DECK II to DECK L

To stop recording temporarily

Press the pause ( I II ) button of the operating deck.

•To resume recording, either press the pause (11II) button again, or press the playback (b" or •) button.

To stop recording

Press the stop (11) button of the operating deck.

RELAY RECORDING SEQUENCE WITH REVERSE MODE SWITCH SETTING

The recording sequence depends on the setting of the REV MODE switch and on which playback (b" or •) button is pressed first.

The recording sequence for each possible selection is shown below.

• Relay recording always begins from the direction indicated by

the tape transport indicator ( [> or <3 ). To change this direc-

tion, press the desired playback (b" or •) button, then immedi- ately press the stop (11) button.

16

<RRB1143>

En

ID : DECK I forward recording

1<3 : DECK I reverse recording

lid : DECK II forward recording

11<3 : DECK II reverse recording

oo: Auto-reverse function

: Relay

REV

Starting

Another

 

 

MODE

playback

deck

 

Recording sequence

switch

button

mode

 

 

 

DECK lb"

II•

ID

ooi<3_lll>ooli<:3

 

DECK Ib"

II•

I_

oo1<3_11<3

_-)

DECK I•

lib"

1<3

_IID oo11<3

c--,J

DECK I•

I1•

1<3

_11<3

[ PARALLEL RECORDING (CT-W803RS only) J

2103 42

1

85

7

1

1.Load tapes for recording in DECK I and DECK II.

2.If you use AUTO BLE tuning, see page 15.

3.Set the type of the DOLBY NR ON/OFF switch and set the DOLBY NR switch.

4.Set the REV MODE switch.

•To record on one side only, set the switch to the------posi- tion. To record on both sides, set the switch to either the ----_

or the (-".,-Jposition.

5.Press the recording (e) button of DECK I.

6.Prepare the audio source from which you wish to rec- ord. Turn on the stereo amplifier and prepare it for playback of the desired audio source.

7.Adjust the recording level. For details, see page 14

"ADJUSTING THE RECORDING LEVEL".

8.Press the stop (e) button of DECK .

9.Set the tape transportation direction for recording Parallel recording is always begun from the direction indicated by the tape transport indicator (b" or •). To change this direc- tion, press the desired playback button (b'or •), then immedi- ately press the stop (11) button.

10.Press PARALLEL REC button.

Both DECK I and DECK II start recording the same sound source.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents For U.S. and Canadian models Important NoticeFor Canadian model Safety Instructions For USE in the United KingdomWe Want You Listening For a Lifetime Installation ContentsCheck Cassette Before USE Tips on Cassette TapesAre the accidental erasure prevention tabs intact? Automatictape SelectorfunctionPioneer System Remote Control Connecting Recording Playback CordsConnecting the Power Cord Lfront Panel Facilities Reverse Mode Switch REV Mode One way mode z positionDouble Decks system remote control Except for CT-W803RS Auto BLEFunction Display Dolby NR & Dolby HX PROB/C-type Dolby NR Systems Dolby HX PRO Headroom Extension SystemTape Transportation Mode Indicators For both Deck IFor both Deck Except for Deck I of CT-W603RS TWO Modes CounterRemote Control Operation Remote Control Operable RangePower button CT-W803RS onlySingle Playback Either Deck I or DeckCT-W603RS Relay PlaybackMusic Search Playback Sequence with REV Mode Switch SettingPlayback Adjusting the Recording Level Recording Using MicrophoneSingle Recording Recording MuteAuto BLE Tuning When tuning Deck II or23 1 RecordingRelay Recording Sequence with Reverse Mode Switch Setting Adjusting the Recording LevelParallel Recording CT-W803RS only J 2103 ModeWhen the compact disc finishes playing CDeDECK Synchro RecordingAbout Recording To stop recording temporarilyNormal To stop copyingHigh Troubleshooting PowerCassette Door PlaybackTroubleshooting POWER-CORD CautionNR ON/OFF OthersAccessories SubfunctionsMiscellaneous MICRRB1 lqJ About ModeTIME/COUNT Pioneer Electronic Europe N.V

CT-W603RS, CT-W803RS specifications

The Pioneer CT-W803RS and CT-W603RS cassette decks are celebrated models in the world of audio equipment, renowned for their exceptional sound quality and robust features tailored for audio enthusiasts. Both models represent Pioneer's commitment to high-fidelity sound reproduction, blending cutting-edge technology with user-friendly interfaces.

The CT-W803RS, the flagship of the duo, boasts advanced dual cassette recording capabilities, allowing users to effortlessly transfer music from one cassette to another while maintaining high audio fidelity. One of its standout features is the Double-Dolby system, which includes Dolby B and C noise reduction, significantly minimizing background noise and enhancing the overall listening experience. This model is also equipped with a high-quality quartz PLL (Phase-Locked Loop) digital control system, ensuring precise tape speed and playback accuracy.

Another significant feature of the CT-W803RS is its automatic tape selection function, which detects the type of cassette inserted—normal, chrome, or metal—and adjusts the playback settings accordingly. This automatic optimization ensures that listeners experience the best possible sound, regardless of the tape's formulation. The deck includes a built-in timer that enables users to record from various sources, making it ideal for preserving precious audio moments.

The CT-W603RS, while a step down from the 803 model, does not compromise on quality. It features similar noise reduction technology and automatic tape detection, delivering excellent sound fidelity and user comfort. The 603 model is designed with a compact form factor, making it an attractive choice for those who require high performance without the bulk.

Both models come with programmable features, allowing users to create custom playlists for audio enjoyment. They also support standard features like auto-reverse capability, making it easy to listen to both sides of a tape without interruptions.

In terms of connectivity, both cassette decks offer line-level inputs and outputs, ensuring compatibility with various audio systems. The design aesthetic of both models reflects Pioneer's quality with durable construction and sleek, intuitive controls.

In summary, the Pioneer CT-W803RS and CT-W603RS cassette decks exemplify the pinnacle of analog audio technology. With their advanced recording features, noise reduction systems, and automatic tape detection, they cater to a wide audience from casual listeners to serious audiophiles, making them worthy components in any audio setup.
Top Page Image Contents