Graco 313342D important safety instructions Moving Parts Hazard

Page 4

Warnings

WARNING

MOVING PARTS HAZARD

Moving parts can pinch or amputate fingers and other body parts.

Keep clear of moving parts.

Do not operate equipment with protective guards or covers removed.

Pressurized equipment can start without warning. Before checking, moving, or servicing equipment, follow the Pressure Relief Procedure in this manual. Disconnect power or air supply.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

Read MSDS’s to know the specific hazards of the fluids you are using.

Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

Always wear impervious gloves when spraying or cleaning equipment.

BURN HAZARD

Equipment surfaces and fluid that’s heated can become very hot during operation. To avoid severe burns, do not touch hot fluid or equipment. Wait until equipment/fluid has cooled completely.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:

Protective eyewear

Clothing and respirator as recommended by the fluid and solvent manufacturer

Gloves

Hearing protection

4

313342D

Image 4
Contents Dosing Valve Contents Related ManualsFire and Explosion Hazard Moving Parts Hazard Setup Resin Left Hardener RightRepair Replace air cylinder sealsRepair 313342D Parts 255478, Dosing Valve for XM Plural-Component Sprayers245846, Xtreme Mix Dosing Valve 109 101Common Parts Varying PartsPart No. Description Qty Dosing Valve Description 255478 245846 QtyTechnical Data DimensionsGraco Standard Warranty Graco Information