Graco 309868D important safety instructions Moving Parts Hazard

Page 3

Warnings

WARNING

MOVING PARTS HAZARD

Moving parts can pinch or amputate fingers and other body parts.

Keep clear of moving parts.

Do not operate equipment with protective guards or covers removed.

Pressurized equipment can start without warning. Before checking, moving, or servicing equip- ment, follow the Pressure Relief Procedure in this manual. Disconnect power or air supply.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

Read MSDS’s to know the specific hazards of the fluids you are using.

Store hazardous fluid in approved containers, and dispose of it according to applicable guide- lines.

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help pre- vent fire and explosion:

Use equipment only in well ventilated area.

Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop cloths (potential static arc).

Keep work area free of debris, including solvent, rags and gasoline.

Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.

Ground equipment and conductive objects. See Grounding instructions.

Use only grounded hoses.

Hold gun firmly to side of grounded pail when triggering into pail.

If there is static sparking or you feel a shock, stop operation immediately. Do not use equip- ment until you identify and correct the problem.

309868D

3

Image 3
Contents Mini Fire-Ball225 Oil Pump ContentsPressurized Equipment Hazard Equipment Misuse HazardMoving Parts Hazard Installation Grounding Mounting the PumpPressure Relief Procedure Starting and Adjusting the PumpOperation Problem Cause Solution TroubleshootingAir Motor and Throat Service DisassemblyBefore You Start Reassembly Clean and ServiceCutaway View Air Motor and Throat Service Flush the pump and relieve the pressure Displacement Pump ServiceDisplacement Pump Service 309868D Parts Part No. Description Qty No. Part No. Description QtyData measured with 10 weight oil at 70F 21C Technical DataDimensional Drawings Mounting Hole LayoutOrder gasket 15R881 for sealed tank/drum mounting Graco Information Graco Standard Warranty