Reciprocator Repair
4.Screw connecting rod (107) into displacement rod (35) until holes align. Install cotter pin (204) through holes.
8 |
|
107 |
|
| 204 |
| 107 |
114 | 35 |
| |
FIG. 30 |
|
5.Apply thread lubricant to spacer tube (114) and thread into pump adapter (8). Use a 7/8 inch crow foot wrench on retainer seal (113). torque to
6.Use a strap wrench to screw together shovel tube (117) and pump cylinder (109).
7.Connect hydraulic supply and return hoses to fit- tings (5, 60).
To reduce risk of static sparking, be sure to reconnect ground wire before operating pump.
113
117
FIG. 31
20 | 312350K |