Pioneer DEH-P6400 operation manual Built-in CD Player, Playing a CD

Section

04Built-in CD Player

Playing a CD

1

2

These are the basic steps necessary to play a CD with your built-in CD player. More advanced CD operation is explained starting on page 17.

1TRACK NUMBER indicator

Shows the track currently playing.

2PLAY TIME indicator

Shows the elapsed playing time of the cur- rent track.

1Press OPEN to open the front panel. CD loading slot appears.

• After inserting a CD, press SOURCE to select the built-in CD player.

2Insert a CD into the CD loading slot. Playback will automatically start.

CD loading slot

EJECT button

•You can eject a CD by pressing EJECT.

•To avoid a malfunction, make sure that no metal object comes into contact with the front panel is open.

3After a CD has been inserted, close the front panel.

4Use VOLUME to adjust the sound level. Rotate to increase or decrease the volume.

5To perform fast forward or reverse, press and hold 2 or 3.

6To skip back or forward to another track, press 2 or 3.

Pressing 3 skips to the start of the next track. Pressing 2 once skips to the start of the current track. Pressing again will skip to the previous track.

Notes

•The built-in CD player plays one, standard,

12-cm or 8-cm (single) CD at a time. Do not use an adapter when playing 8-cm CDs.

•Do not insert anything other than a CD into the CD loading slot.

•When CD TEXT disc is inserted, lights.

•If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting the disc again.

•If the built-in CD player does not operate prop- erly, an error message such as ERROR-11may be displayed. Refer to Understanding built-in CD player error messages on page 39.

16En