Chauvet LEDrain 38c Master/Slave Mode Sound-Active, Auto Mode, Static Colors, Strobe Speed

Page 9

Master/Slave Mode (Sound-Active, Auto Mode, Static Colors)

This mode allows a single unit to run a standalone program, while 1 or more other units follow the same operation. This requires the fixtures to be linked with DMX cables. Please see the section on Fixture Linking.

1)The Master unit may be operated in Automatic, Sound-Active, and Static Colors.

2)Adjust the DIP switches to the Slave position on the slave units, and they will react the same as the Master. See below for DIP switch assignment.

Mode

DIP switches

Slave

2~11 = Off

 

1 = On

Strobe Speed

This fixture has a strobe speed adjustment which will decrease the maximum speed. Please see the setting below for lowering the strobe rate for compatibility mode.

Mode

DIP switches

Standard mode

 

6 Hz~18 Hz:

12 = On

Decreased Speed

 

2 Hz~6 Hz:

12 = Off

5. Appendix

9

4/19/2010 1:08 PM

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Snapshot Table of Contents Before YOU Begin What is includedUnpacking Instructions Manual ConventionsSafety Instructions Features IntroductionProduct Overview AC Power SetupOrientation MountingAccessing the 2 Personalities Configuring the Starting AddressOperating Instructions DMX OperationStrobe Speed Master/Slave Mode Sound-Active, Auto Mode, Static ColorsAutomatic Standalone OperationDMX Channel Values CH ModeGeneral Maintenance AppendixDMX Primer Fixture Linking Data CablingSetting up a DMX Serial Data Link Pin to 5-Pin Conversion ChartSetting the Starting Address General TroubleshootingContact Us Claims Returns ProcedurePower Technical Specifications
Top Page Image Contents