Stowaway Light Base

911339 (2-Wire)

911639 (3-Wire) Installation Instructions

Attwood marine hardware, navigational lighting, bilge pumps, and other marine accessories are specified more than any other brand by America’s best-known boat manufacturers as original equipment. Look to Attwood for quality replacement parts and marine accessories.

1.Position the light base either on the bow for combination sidelights or the stern for all-round lights. Be sure that the mounting surface is flat and that the selected area will accommodate the base dimensions.

2.Using the template provided (see Figure 2), locate the base center line parallel to the boat fore-and aft center line and carefully mark the center installation hole and the three screw holes. Drill 1-3/8" diameter hole being very careful not to crack or break the gelcoat finish around the edge of the hole. Drill the three screw holes. Ensure no burrs are left around 1-3/8" hole.

NOTE: On some installations you may have to connect the wires then push them back through wire hole prior to screwing down the base.

3.Apply sealant between deck and light base. Fasten base in place with three stainless steel screws.

SAVE THESE INSTRUCTIONS
Form Number 69230 Rev. D	03-10

FEATURES:

This base is designed for use with the Attwood 7100 Series All-Round Lights and Attwood Combination Sidelights with an angled pole.

For 12-volt D.C. only.

CAUTION:

To prevent personal injury, always disconnect the power source when installing or servicing this product. Always remove the boat from the water before using 120V AC power tools.

INSTALLATION INSTRUCTIONS:

NOTE: For technical detailed positioning follow the standards of navigation rules. Below (see Figure 1) are simplified drawings of placement of navigational lights in relationship to one another.

Figure 1

Figure 2

CAUTION: DO NOT OVERTIGHTEN SCREWS.

4.Wire as follows:

A.911339 (2-wire base): Connect one black wire to the battery ground (-) harness, using a crimp-on wire connector. Attach the remaining black wire to the positive switched wire from the navigation light switch.

B.911639 (3-wire base): Connect black wire to the battery ground (-) harness, using a wire connector. Connect the solid gray wire to the wire from the switch for the anchor, courtesy, or navigation light (depending on the light being used). Use a wire connector to make the connection. Connect the black/gray wire to the wire from the switch for the navigation, courtesy, or running lights (depending on which light is used) using a wire connector.

NOTE: Follow instructions for specific light being used in this base for wire connections.

C. All positive wires must be fused to protect the circuit. Tape connections for added safety. MAKE SURE POWER SOURCE IS 12-VOLT D.C. ONLY. HIGHER VOLTAGE CAN CAUSE DAMAGE TO LIGHT AND WIRE CIRCUITRY.

5.Check the base function by first rotating the cover 90°, exposing

the hole for the pole. Insert the light pole into the socket and lock in place by rotating cover 90°. Turn navigation running lights on to make certain they function properly. Turn anchor or courtesy

switch on and make certain light works properly. Remove the pole by rotating the cover 90° and, once pole is removed, rotate the cover 90° forward to cover the hole, to keep dust and dirt out.

This product carries the standard Attwood one year warranty. See Product Catalog for details.

Holes for

3 #10 Screws

•

1-3/8" Hole

•

FORWARD

Position on boat center line when installing combination bow light

•

Position parallel to and as close to the boat center line as practicable near the transom when installing all-around light

Allow for rotation of swing cover

•

1016 N. Monroe Street, Lowell, MI 49331-0260 www.attwoodmarine.com

911639, 911339 specifications

The Attwood 911339 and 911639 are notable marine products that stand out for their reliability and innovative design, catering to boating enthusiasts and professionals alike. These models come equipped with a range of features that enhance their functionality and user experience, making them exemplary choices for watercraft operations.

One of the main features of the Attwood 911339 model is its efficient and powerful electric bilge pump system. Engineered to handle various capacities, the pump offers reliable performance in removing excess water from the bilge, helping to maintain vessel integrity and safety. With a robust construction, this model is designed to withstand the harsh marine environment, ensuring longevity and dependable operation during critical situations.

The Attwood 911639, on the other hand, is designed with a slightly larger capacity, further enhancing its utility for larger boats or those that operate in challenging conditions. This model boasts advanced technologies such as automatic bilge sensing, which activates the pump when water is detected, providing peace of mind for boat owners. The pump's efficient power consumption is also noteworthy, as it allows for prolonged use without putting too much strain on the boat’s electrical system.

Both models incorporate durable materials that resist corrosion and wear, essential attributes for marine applications. They are equipped with easy installation features, making them user-friendly for boaters looking to upgrade or replace existing systems. The innovative design includes a compact footprint, ensuring that they fit conveniently in the limited spaces typical of many boats.

Another critical characteristic of the Attwood 911339 and 911639 is their low noise operation, which enhances the overall boating experience by minimizing disturbances. Additionally, these pumps are designed for easy maintenance, with accessible components that can be serviced or replaced without extensive effort.

In conclusion, the Attwood 911339 and 911639 models represent the pinnacle of marine bilge pump technology. With their combination of efficiency, reliability, and user-friendly features, they are trusted choices for both recreational and professional mariners. Whether navigating calm waters or tackling rough seas, these models provide the assurance that any vessel is equipped with a top-tier pumping solution.