Hitachi starboard manual Safety Precautions

Page 6

StarBoard T-17SXL

Safe Handling

 

 

 

 

 

Safety Precautions

Always comply with them

 

 

 

 

 

WARNINGS

Securely insert the power plug into the power outlet.

If it is not plugged in securely, overheating will occur, possibly resulting in electric shock or fire.

Before moving this product, detach the power plug and the power cable.

The power cable might be damaged, possibly resulting in electric shock or fire.

Do not plug in the power plug with a wet hand.

Electric shock will result.

When plugging in or unplugging the power plug, hold the plug.

If the power cord is pulled, it might be damaged, possibly resulting in electric shock or fire.

Before cleaning this product, unplug the power plug.

Electric shock sometimes results.

Periodically clean the power plug to remove dust.

If a dirty plug is plugged into an outlet, fire or electric shock might result.

Do not use this product near water.

Electric shock will result.

Do not damage, break, process, or forcibly bend the power cable.

The power cable will be damaged, resulting in fire or electric shock.

Be careful about the locations of the power cable, etc.

The power cable might trip someone, possibly causing the product to fall, etc., thereby causing injury or product failure. Be careful with their locations.

Use the product at the indicated power supply voltage.

If the product is used at a power sup-ply voltage other than the one indicated, it will fail, resulting in fire or electric shock.

4English

Image 6
Contents How to Request a Users Guide StarBoard T-17SXLPage Disclaimers FCC WarningProduct Assurance Provisions Manufacturer for RepairsManual Creation Dates June 2005, First Edition Markings and Symbols Safe HandlingSafety Precautions 5English 6English Use the AC Adaptor supplied with this product Use the screen at an easily viewable angleContents Introduction Usage ProceduresAppendix Page Preparations before Use FeaturesIntroduction Product OverviewParts Check Name QtyPart Names and Functions Front ScreenFront Switch Panel IntroductionConnector Panel View of StarBoard Back Right SideFunction Buttons Assembly and Setup Adjusting the StandStand Lever How to Use the Pen Holder Connection Procedure StarBoardPC To power outlet10English Usage Procedures Push the power buttonTurning the StarBoard On ON/OFF switch Push the switch Using the Stylus PenHow to Use the Stylus Pen Basic Stylus Pen OperationsStylus Pen Settings Pen tip Side Button NoChanging the Battery in the Stylus Pen Negative side Positive sideReplacing the Stylus Pen Tip Using the OSD Menu OSD Buttons and Their FunctionsOSD Adjustment Options UsageColor Temprature Usage Page Troubleshooting AppendixStylus pen-related problems This case Check this Do this Appendix3English System Specifications SpecificationHow to Take Care of the StarBoard ConsumablesLCD Panel Provisions of Product Warranty Product Name Part Name Warranty Coverage7English