Multiquip 21362 manual HPLA/HPHA-SERIES 36TROWEL Options, Grinding Attachments

HPLA/HPHA-SERIES 36"TROWEL — OPTIONS

Grinding Attachments

Available grinding attachments are used for grinding surface imperfections or joints.These attachments allow greater utilization of your trowel. (Figure 35) illustrates a typical grinding disk assembly, complete with hub and stone mounting plate.

Trowel Arm Adjustment Tool

If blades show uneven wear patterns or some tend to wear out faster than others, the trowel arms may need to be adjusted. Whiteman makes a special tool (Figure 37) that will adjust all of the trowel arms consistently.The Trowel Arm Fixture P/N is 1817.

Figure 37.Trowel Arm Adjustment Fixture

Figure 35. Grinding Disk

Lifting Bail

There is a heavy duty, center balance type lifting bail (Figure 36) made specifically for your trowel. These bails are ideal for lifting and transporting your trowel.They are designed to lift the finisher and balance it on it’s center of gravity, providing great stability while lifting.This option is not available on electric trowel models.

Figure 36. Lifting Bail

HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #3 (07/06/10) — PAGE 29