Multiquip 21362 manual HPLA/HPHA-SERIES 36TROWEL Maintenance, V-Belt will tension itself

HPLA/HPHA-SERIES 36"TROWEL — MAINTENANCE

Changing The V- Belt

1.Unscrew the two (2) t-bolts from the belt guard and remove the lockwashers.(Figure 49).

Figure 49. Removing The Belt Guard

2.Work belt around and off the bottom pulley and remove belt.

3.Replace with the appropriate belt for your machine: HPLA36 uses p/n 0261 (A-31)

HPHA36 uses p/n 0152 3 (A-28)

4.Place the belt in the groove of the upper pulley then work the belt over the bottom pulley into place.

The V-Belt will tension itself

NOTE automatically during operation. NO

FURTHER ADJUSTMENT OR

TENSIONING IS NECESSARY.

5.Replace the belt guard, lockwashers, and secure with theT- bolts.

WARNING!

NEVER operate equipment with covers, or guards removed. Keep fingers, hands, hair and clothing away from all moving parts to prevent injury.

PAGE 36 — HPLA/HPHA-SERIES 36" WALK-BEHINDTROWEL— OPERATION AND PARTS MANUAL — REV.#3 (07/06/10)